Exposed Aggregate Sealing Prahran
Protect exposed aggregate from stains, weather and surface wear
Get a Quote in Prahran
Servicing Prahran for 33 Years
Locally owned | Fully insured | Support after the job is done
Get a Quote in Prahran

Concrete Sealing Prahran

Concrete Sealing Prahran for Outdoor Surfaces

Nupave provides concrete sealing in Prahran for plain concrete, exposed aggregate, coloured concrete and decorative concrete surfaces. Prahran is part of the City of Stonnington service area, so this page is focused on practical concrete sealing and resealing help for properties in and around the suburb.

Concrete around Prahran properties can be affected by water absorption, grime, mould growth, dull colour and stains from normal outdoor use. Where the surface is dirty or slippery, cleaning first gives the sealer a better chance of bonding evenly and lasting properly.

Send photos of the concrete if you are unsure what it needs. We can give realistic guidance on whether cleaning and sealing is enough, whether resealing is suitable, or whether the surface needs more detailed restoration first.

Get Your Free Prahran Concrete Sealing Quote

worn exposed aggregate patio before resealing Melbourne
Worn exposed aggregate before cleaning and resealing, showing faded colour and surface wear
exposed aggregate patio after resealing Melbourne
Exposed aggregate after cleaning and resealing, restoring colour and protecting the surface from further wear

Driveway Sealing Choices for Prahran Properties

Not every Prahran driveway needs the same sealer. Exposed aggregate, coloured concrete, resurfaced concrete and plain concrete can all respond differently depending on the age of the surface and how much sealer is left.

For work in the City of Stonnington service area, Nupave checks whether the surface needs cleaning, clear resealing, colour sealing or a more detailed restoration approach. Common issues include fading, tyre marks, dirt, leaf staining and old sealer wear.

For nearby examples of the same service coverage, see Armadale, South Yarra and Toorak. If the surface is dirty or slippery, pressure cleaning in Prahran is usually the first step before sealing.

Concrete driveway before pressure cleaning and resealing in Berwick Melbourne
Concrete driveway in Berwick prior to pressure cleaning and resealing maintenance approximately 8 years after the original resurfacing system was installed.
Concrete driveway after pressure cleaning and resealing in Berwick Melbourne
Concrete driveway in Berwick after pressure cleaning approximately 8 years after the original resurfacing system was installed by Nupave

The Case for Sealing Concrete in Prahran

In the inner suburbs, period homes mean older concrete, narrow shaded side paths between buildings, and established gardens and street trees dropping leaf litter that stains pale surfaces. Smaller areas keep costs down, but shade keeps growth persistent. Those conditions are exactly what concrete sealing is designed to handle.

Sealed concrete resists oil, tannin and organic staining, sheds water through winter, and keeps its colour under summer UV instead of fading out. Maintenance gets easier too — a sealed driveway in Prahran cleans up with a rinse where an unsealed one needs a full pressure wash. And for coloured, stencilled or exposed aggregate surfaces, sealing on a sensible cycle is the difference between a finish that lasts decades and one that looks tired in a few years. Faded surfaces can often be revived with colour sealing rather than full resurfacing.

Driveway before pressure cleaning and concrete sealing in Berwick Melbourne
Concrete driveway in Berwick before pressure cleaning and concrete sealing maintenance approximately 8 years after the original resurfacing system was installed.
Concrete sealing driveway in Berwick Melbourne after pressure cleaning and resealing
Concrete driveway in Berwick after pressure cleaning, 8 years after initial install of concrete resurfacing by Nupave

Pressure Washing Prahran Concrete Surfaces

Cleaning is half of what keeps concrete looking right, and our Prahran high pressure cleaning covers it: deep-set grime, mould, moss, algae and tannin staining lifted from driveways, paths, patios and pool surrounds.

The method is chosen to suit the surface rather than the machine — standard concrete cleans at higher pressure, decorative and older surfaces get controlled pressure or a low-pressure soft wash, and stains are pre-treated with biodegradable products. It works as a standalone service, a pre-sale tidy-up, or stage one of a clean and seal.

Driveway before concrete sealing in Berwick Melbourne
Decorative concrete driveway in Berwick prior to pressure cleaning and concrete sealing maintenance by Nupave.
High pressure cleaning and sealing driveway in Berwick Melbourne
Concrete driveway in Berwick after high pressure cleaning and resealing maintenance completed by Nupave.

Our Clean and Seal Process in Prahran

A driveway seal is only as good as the preparation under it, so our Prahran process is built backwards from that fact.

It starts with an inspection: surface type, previous coatings, stains, cracks and access all affect the approach, and the quote is fixed before work starts. Cleaning comes next — high pressure where the concrete can take it, soft washing where it can’t, with oil and organic stains pre-treated rather than just blasted. Then the step people underestimate: drying. Sealer applied over damp concrete clouds and peels, so we wait until the surface is ready.

Only then does the sealer go down, in even coats matched to the surface — and the result is a finish that bonds properly instead of failing in its first year.


What You’ll Pay for Concrete Sealing in Prahran

Straightforward numbers first: expect approximately $3–$5 per square metre for pressure cleaning and $25–$35 per square metre for a two-coat seal in Prahran, with clean-and-seal packages priced better together than apart.

From there it’s about your particular slab. Plain concrete is the simplest case. Exposed aggregate and stencil work need protective technique that takes longer. Existing coatings sometimes have to come off before new sealer can go on. Big open driveways price differently to small fiddly courtyards, and premium sealers cost more than standard acrylics.

Every job gets a free fixed-price on-site quote before work begins — no hourly surprises, no hidden extras.

The Nupave Difference for Prahran Properties

What Prahran customers tend to value isn’t a secret technique — it’s discipline. Quotes are fixed and free, so the price doesn’t move. Preparation is done properly, because sealer over a dirty or damp slab fails no matter how good the product is. Surfaces are treated as what they are: plain concrete cleaned strongly, decorative finishes handled gently, fragile surfaces soft washed.

And because Nupave also resurfaces and repairs concrete, the advice is complete: when a clean and seal is the right call you get exactly that, and when it isn’t, you find out before spending the money.

Looking After Your Sealed Concrete Long Term

Sealed concrete still benefits from an occasional professional eye, which is why we run a maintenance program for Prahran projects. Your job stays on file, and when the surface is approaching the point where inspection, cleaning or resealing might be due, we send a reminder.

The philosophy is condition-based, not calendar-based. Some driveways need attention at three years, others are fine at six — it depends on traffic, sun, shade and how the surface has weathered. We check before we recommend, which keeps your spend preventative rather than reactive, and keeps the surface protected without paying for work it doesn’t need.

Frequently Asked Questions About Sealing & Pressure Cleaning in Prahran

In Melbourne’s wet winter and high summer UV cycle, acrylic sealers commonly need resealing every 2–3 years, while penetrating sealers can last 5–10 years depending on traffic, exposure and surface condition. If you are asking “how often should I seal my concrete driveway” or “how long does concrete sealer last”, the best answer depends on the sealer type, driveway use and whether the surface is shaded by gum trees or exposed to full sun.

Yes, when the correct pressure, nozzle and method are used. If you are wondering “is pressure cleaning safe for concrete driveways”, the key is matching the equipment to the surface. We use appropriate PSI for residential concrete, lower pressure for exposed aggregate or decorative concrete, and soft wash methods for delicate Olde Prahran paving or heritage-style finishes.

As an indicative range, pressure cleaning is approximately $3–$5/m², and a two-coat seal is approximately $25–$35/m². Final pricing depends on the concrete surface type, stains, access, size, sealer choice and preparation required. We provide a free quote before starting, so the cost is clear.

Yes. If you are asking “should I clean my driveway before sealing”, the answer is absolutely. Sealing over dirt, oils, mould, algae or old stains can affect adhesion and appearance. Proper cleaning, spot treatment and a full 24 to 48 hour drying period help the sealer bond and protect the concrete properly.

Yes. Nupave provides concrete sealing, resealing, pressure cleaning and driveway sealing in Prahran and nearby City of Stonnington suburbs, including Armadale, South Yarra, Toorak, Kooyong, Malvern and Malvern East. We also complete body corporate, strata and common-area concrete sealing work across local properties.

Areas We Service Around Prahran

Nupave provides concrete sealing, concrete resealing, driveway sealing and pressure cleaning services in Prahran and nearby suburbs across the City of Stonnington service area. You can also see broader local coverage through our City of Stonnington service area page.

Nearby concrete sealing areas include Armadale, South Yarra, Toorak, Kooyong, Malvern, Malvern East, Windsor and Glen Iris.

For broader service information, visit our Concrete Sealing Melbourne page.

For local concrete sealing Prahran and high pressure cleaning Prahran, call Nupave today.