Exposed Aggregate Sealing Cranbourne
Protect exposed aggregate from stains, weather and surface wear
Get a Quote in Cranbourne
Servicing Cranbourne for 33 Years
Locally owned | Fully insured | Support after the job is done
Get a Quote in Cranbourne

Concrete Sealing Cranbourne

Concrete Sealing in Cranbourne

Cranbourne proper — the older established suburb, not the growth pockets surrounding it — has been a settled community for forty years. The streets running off the South Gippsland Highway, the corridor around the racecourse, the established blocks near the Royal Botanic Gardens Cranbourne — these are mature suburbs. Most of the driveway concrete here was poured in the 70s, 80s and 90s. Most is still in service. Almost none has ever been sealed.

That’s the Cranbourne story in two sentences. The slabs are sound. They just haven’t had any protection in 30 or 40 years. Nupave has been sealing concrete across Cranbourne and the south-east corridor since 1993.

worn exposed aggregate patio before resealing Melbourne
Worn exposed aggregate before cleaning and resealing, showing faded colour and surface wear
exposed aggregate patio after resealing Melbourne
Exposed aggregate after cleaning and resealing, restoring colour and protecting the surface from further wear

Types of Concrete Sealer We Use in Cranbourne

Two practical options for most older Cranbourne driveways:

Clear penetrating sealers — protect without visual change. Suits driveways where the existing surface is acceptable and the owner just wants protection.

Coloured penetrating sealers refresh tired older slabs or transform plain concrete with a tinted finish. Useful on 70s and 80s driveways where the original character has worn out.

Anti-slip sealers add fine aggregate for steep sections.

Acrylic and film-forming sealers — used selectively. Matte finishes only.

Concrete driveway before pressure cleaning and resealing in Berwick Melbourne
Concrete driveway in Berwick prior to pressure cleaning and resealing maintenance approximately 8 years after the original resurfacing system was installed.
Concrete driveway after pressure cleaning and resealing in Berwick Melbourne
Concrete driveway in Berwick after pressure cleaning approximately 8 years after the original resurfacing system was installed by Nupave

The 2–5 Year Cycle for Cranbourne Driveways

Every concrete driveway should be resealed every 2–5 years. The cycle is the same regardless of postcode. In Cranbourne, conditions are inland-suburban — no marine exposure, moderate UV, reactive clay soil. Most properties sit in the middle to longer end of the 2–5 cycle.

The cycle still matters. A 40-year-old Cranbourne driveway that’s never been sealed has accumulated decades of damage that sealing now slows but can’t reverse.

Driveway before pressure cleaning and concrete sealing in Berwick Melbourne
Concrete driveway in Berwick before pressure cleaning and concrete sealing maintenance approximately 8 years after the original resurfacing system was installed.
Concrete sealing driveway in Berwick Melbourne after pressure cleaning and resealing
Concrete driveway in Berwick after pressure cleaning, 8 years after initial install of concrete resurfacing by Nupave

Concrete Cleaning in Cranbourne

Need the clean without the seal? Nupave’s Cranbourne pressure cleaning service handles stained, slippery or grimy concrete on its own: driveways, paths, patios, pool surrounds, pavers and exposed aggregate.

Equipment is commercial grade but applied with judgement — typically at or below 3,000 PSI for home concrete, lower or soft washed where the surface calls for it. Oil, tannin and organic growth get biodegradable pre-treatment so the result lasts, and the clean often shows whether your sealer is still doing its job or due for renewal.

Driveway before concrete sealing in Berwick Melbourne
Decorative concrete driveway in Berwick prior to pressure cleaning and concrete sealing maintenance by Nupave.
High pressure cleaning and sealing driveway in Berwick Melbourne
Concrete driveway in Berwick after high pressure cleaning and resealing maintenance completed by Nupave.

Our Concrete Sealing Process

Every Cranbourne sealing job follows the same approach.

  1. Free on-site assessment — inspect the concrete, check for clay-related cracking, identify the right sealer.
  2. Surface preparation — pressure clean, treat oil and stain marks at the garage threshold, fill stable hairline cracks at joints, allow surface to dry.
  3. Sample on a small section — particularly useful when choosing between clear and coloured seal.
  4. Apply the sealer system — two-coat penetrating application with appropriate dry time.
  5. Cure and return-to-traffic — light foot traffic within hours, vehicle traffic 24–48 hours.
  6. Maintenance schedule — added to the client care register for cycle reminders.

When Sealing Isn’t Enough

If your driveway has active scaling beyond hairline issues, loose aggregate, structural cracking from significant settlement, or paste worn through — sealing alone won’t fix it. We’d recommend resurfacing instead.

A properly applied resurfacing finish lasts 10–20+ years on a Cranbourne driveway when it’s done right and maintained on the sealer cycle. We’ve got driveways in the south-east corridor we resurfaced over 20 years ago still in service today.

How Much Does Concrete Sealing Cost in Cranbourne

Concrete sealing in Cranbourne typically runs $2,800–$5,000 for a standard residential driveway.

  • Size — most Cranbourne driveways are 60–80m².
  • Surface condition — clean reseal vs first-time sealing on a 40-year-old unsealed slab.
  • Sealer type — clear penetrating, coloured seal or anti-slip system.
  • Preparation — older slabs often need more prep work.

Written quote after the on-site assessment.

Frequently Asked Questions About Sealing & Pressure Cleaning in Cranbourne

How often should I reseal my Cranbourne concrete driveway?

Every 2–5 years. Most Cranbourne properties sit toward the longer end of the range because there’s no marine exposure to accelerate sealer breakdown.

Is sealing worth doing on a 30 or 40 year old Cranbourne driveway that’s never been sealed?

Almost always yes if the slab is structurally sound. First-time sealing locks in what’s left of the surface and keeps the driveway functional for another decade or more. Most older Cranbourne driveways come out as sealing jobs rather than resurfacing or replacement.

Clear seal or coloured seal — which suits an older Cranbourne driveway?

Coloured seal often works better on tired older driveways because the original surface character has weathered out. Transforms the visual presentation in two days. Clear seal preserves what’s there without visual change. Sample boards come to the quote visit.

Will sealing help with the hairline cracking at the joints?

Sealing isn’t a structural fix for clay-related cracking. What it does is reduce moisture penetration that compounds the cracks and stops dirt from settling in. For stable hairline cracks we typically fill them before sealing.

Can sealing handle the oil staining at my garage threshold?

Existing oil stains are treated during prep with degreasing. The sealer then stops new oil from absorbing. Most Cranbourne driveways have some level of oil staining — we treat it as part of the standard prep.

How long does sealer take to dry before I can drive on it?

Light foot traffic is usually OK within a few hours. Vehicle traffic generally needs 24–48 hours depending on weather, sealer type and surface conditions.

Service Areas Around Cranbourne

Nupave seals concrete across Cranbourne, Cranbourne East, Cranbourne North, Cranbourne South, Cranbourne West, Botanic Ridge, Junction Village, Lyndhurst and the rest of the south-east corridor — all within our service area.

Book a Concrete Sealing Quote in Cranbourne

Call Shaun on 0418 741 188 or email enquiries@nupave.com.au. Free on-site assessment, written quote within a few business days, no deposit, no pressure. If your driveway doesn’t need sealing — or if it needs more than sealing — we’ll tell you straight.