Nupave recommended external concrete specification — Tyabb
Group 5 — Mornington Peninsula — Coastal Sand / Ridge Clay Mix
Concrete: 32 MPa (all exposed aggregate)
Indicative regional ground conditions
Tyabb is on the Mornington Peninsula, where soil profile varies significantly by pocket — from free-draining coastal sand on the flats to reactive clay on the Mt Eliza – Mt Martha ridge. Regional conditions can change block-to-block on this coast. The actual AS 2870 site classification for any individual property can only be established through a site-specific geotechnical investigation, taking into account soil profile, fill, moisture conditions and vegetation.
Regional ground movement (indicative, AS 2870)
Ground of this type may exhibit variable — from generally low on stable sand pockets to 40 mm or more on the reactive-clay ridge. This is a regional indicator only — actual movement at a given address depends on soil profile, moisture history and tree influence.
| Application | Slab thickness | Sub-base | Reinforcement |
|---|---|---|---|
| Path / foot traffic | 75–100 mm | 75 mm compacted crushed rock | SL72 |
| Driveway (cars up to 3 t) | 100 mm | 75–100 mm compacted crushed rock | SL72–SL82 |
| Occasional truck (3–10 t) | 125–150 mm | 100 mm compacted crushed rock | SL82 or rebar |
Nupave standard specification for typical conditions of this soil group — subject to site-specific assessment. Not a design substitute for a project engineer’s report where one is required.
| Saw-cut / control joint spacing (100 mm slab) | |
|---|---|
| Spacing between cuts | 2.4 m – 3.0 m (assess per block — tighter on reactive clay pockets) |
| Cut depth & timing | At least 25 mm on a 100 mm slab (¼ slab thickness). Saw-cut as soon as the concrete can be cut without excessive ravelling — timing will vary with the mix, weather and saw type. A quick trial cut on a low-visibility edge or offcut is best practice before committing to the full grid. |
| What joints do | Closer joint spacing and properly proportioned panels encourage drying-shrinkage and thermal movement to occur at planned locations. Control joints reduce the risk of random cracking; they do not prevent cracking caused by inadequate support or differential ground movement. |
| Panel shape | Keep panels close to square (length ≤ 1.5× width). Long, narrow panels are more prone to random cracking regardless of joint spacing. |
Concrete grade
All Nupave exposed aggregate is poured at N32 as standard, regardless of soil group. The aggregate-exposure process removes the top cement paste layer, so the slab benefits from the higher compressive strength, improved durability and better abrasion resistance of N32. For non-exposed external concrete work, Nupave specifies N25 or N32 depending on application, anticipated loading, exposure conditions, selected finish and any site-specific engineering requirements. Concrete strength alone does not compensate for inadequate subgrade preparation, drainage or ground movement — it is one element within a properly detailed slab system.
Slip layer (poly membrane)
A polyethylene separation or slip membrane may be considered where required by the slab design or site conditions. It can reduce friction between the slab and compacted base during concrete shrinkage, but does not prevent settlement, heave or other vertical ground movement. Where a project engineer or geotechnical report specifies membrane use, that specification takes precedence.
Sub-base — why it’s a key part of the quote
Correct excavation, drainage, and a uniformly compacted crushed-rock base significantly reduce settlement and provide consistent support under the slab. It adds cost — both in laying and compacting the base, and in the extra excavation and spoil-removal that comes with the deeper dig — but that preparation is what a slab needs to perform over the long term. The preparation actually required may vary where uncontrolled fill, soft areas or unsuitable material are encountered on the specific site.
Curing coat
Concrete requires curing to develop its full design strength and durability. A liquid curing coat is applied after finishing, once bleed water has disappeared and in accordance with the manufacturer's requirements. It seals moisture into the concrete so hydration continues over the first 7 days — when the concrete's real strength develops. In summer, hot dry weather removes surface moisture quickly, so curing coat is essential to prevent surface crazing and reduced final strength. In winter, lower temperatures slow hydration, so curing is still required to reach design strength — the curing coat is still applied, and duration may need to be extended. Nupave applies curing coat as standard on all pours year-round.
Microfibres in concrete mix Optional add-on
What fibres actually do. Microfibres (polypropylene) get mixed through the whole pour and mainly control plastic shrinkage cracking in the first 24 hours, plus improve abrasion / impact resistance — they don’t add real structural tensile capacity. Macrofibres (heavier synthetic or steel) go further, adding post-crack toughness and some flexural strength.
Genuine benefit as an add-on: reduces fine / hairline shrinkage cracking and improves durability on any slab, sand or clay.
Should NOT replace mesh on soft or highly plastic clay soils: fibres provide no real resistance to the larger, ground-movement-driven cracks that mesh or rebar controls.
Salt / coastal exposure
Salt / wind exposure applies on foreshore-proximate sites (Portsea, Sorrento, Rye, Rosebud, Dromana, Mount Martha and similar). Nupave uses B1/B2 exposure classification (N32 minimum) and increases concrete cover to reinforcement in these zones to protect against saline-induced corrosion.
Important: This is Nupave’s enhanced standard specification for typical conditions in this suburb group, and is presented as a general reference. It is not a site-specific engineering design. Actual specifications for any individual property may vary based on site conditions, uncontrolled fill, tree influence, drainage, or requirements identified in a site-specific geotechnical or engineer’s report. Where an engineered design has been prepared for the site, that design takes precedence.
Professional Exposed Aggregate Installation and Restoration
Situated approximately 58 km south of Melbourne CBD, Tyabb has earned a reputation as a semi-rural township known for its antique shops and packing house market. Across Tyabb, exposed aggregate concrete is a popular choice for driveways, paths, and entertaining areas. Local attractions include Tyabb Packing House Antiques, Coolart Wetlands nearby, and Tyabb Railway Station.
Exposed aggregate concrete delivers a durable, slip-resistant finish that reveals natural stone textures beneath the cement surface—combining structural performance with decorative appeal for Melbourne properties.
Nupave specialises in exposed aggregate installation and restoration across Melbourne, the Mornington Peninsula, Bass Coast, Phillip Island, and surrounding regions. Our team handles everything from new driveways and pool surrounds to commercial flooring projects, using locally sourced aggregates and installation methods that meet Australian Standards.
Why Exposed Aggregate Concrete is Perfect for Melbourne Properties
Low Maintenance Requirements When Properly Sealed
Exposed aggregate concrete is low maintenance when properly sealed, with resealing typically required every few years to protect against stains, moisture, and wear. General upkeep is simple, usually involving occasional cleaning with water or mild detergent to maintain its appearance. Compared to materials like pavers or timber, it requires significantly less ongoing maintenance while still delivering long-term durability.
At Nupave, our commitment to our customers doesn’t end once the job is complete. We understand that life gets busy, and important maintenance like resealing can easily be overlooked. That’s why we’ve created a simple care plan system, where your project is added to our register and you receive timely reminders when your concrete is due for resealing. There’s no cost for this service—it’s simply part of how we look after our clients and help protect their investment long-term. By staying on top of maintenance, your surface continues to perform and look its best for years to come, without you having to keep track of it yourself.
What Exposed Aggregate Concrete Is and How It’s Created
Exposed aggregate concrete is a decorative concrete finish created by removing the top layer of cement paste to reveal the natural stone, pebbles, and gravel embedded within the mix. This process produces a textured, visually distinctive surface that differs significantly from plain finished concrete. The aggregate—whether basalt, granite, river pebbles, or crushed quartz—becomes the dominant visual element, creating surfaces that range from subtle stone exposure to pronounced decorative textures depending on the desired appearance.
Unlike standard concrete where the aggregate remains hidden beneath a smooth cement surface, exposed aggregate incorporates natural stones as a visible design feature. The variation in stone size, shape, and colour allows for a customised appearance, with each installation carrying a unique character determined by the specific aggregate blend selected. This method has been used in Melbourne for decades, with local suppliers offering aggregate options sourced from Victorian quarries—primarily basalt from the Newer and Older Volcanics geological formations, along with granite and sedimentary rock materials.
The finish is achieved through a controlled washing process where the surface layer of concrete is exposed at a precise timing window. Surface retarders are applied to delay cement paste hardening on the top layer, allowing contractors to wash away the cement and reveal the underlying aggregate without dislodging the stones. This technique requires careful control—exposure too early risks aggregate loss, while waiting too long makes the cement paste difficult to remove. The result is a surface where approximately one-third of the smallest aggregate size becomes visible, creating the characteristic textured appearance.
Durability Compared to Plain Concrete and Other Decorative Options
Exposed aggregate concrete offers durability equal to or greater than plain concrete, with the added benefit of longer-lasting visual appeal. By using natural stone as the wearing surface, it resists abrasion, staining, and weathering far better than standard finishes, making it ideal for driveways and high-traffic areas. Compared to options like pavers or stamped concrete, it provides a more stable, low-maintenance surface that performs reliably over time.
Our Exposed Aggregate Services
Residential Exposed Aggregate
We create custom exposed aggregate installations for residential properties throughout Melbourne and surrounding areas. New driveways benefit from aggregate selection tailored to complement house colours and landscaping, with slab thickness and reinforcement designed for household vehicle loads and local soil conditions.
Pathways, patios, and outdoor entertaining areas receive the same attention to design and construction detail. Pool surrounds utilise aggregate types selected for barefoot comfort and slip resistance, with drainage slopes directing water away from the pool edge and house foundations.
Exposed aggregate resurfacing provides an option for existing concrete surfaces in sound structural condition. This overlay approach can transform plain or deteriorating concrete into attractive exposed aggregate finishes without the full excavation and base preparation required for new installations. Our consultation process assesses whether resurfacing is appropriate for each specific situation based on existing concrete condition and intended use.
Is New Concrete Always Necessary?
Many homeowners assume that worn or dated concrete needs to be completely replaced, but that isn’t always the case. Before committing to new exposed aggregate, a proper assessment can determine whether the existing slab is suitable for improvement rather than removal. This approach can reduce costs, minimise disruption, and still deliver a high-quality finish.
We take the time to assess your concrete properly before recommending anything, so you’re not spending money you don’t need to.
Exposed Aggregate Applications Across Melbourne
Benefits for Melbourne’s Climate and Lifestyle
Melbourne’s weather patterns—variable rainfall, significant UV exposure, moderate temperature ranges with occasional extremes—suit exposed aggregate well. The natural stone aggregates resist UV degradation better than coloured or stamped concrete treatments. The textured surface provides rain traction. Proper installation and sealing protects against moisture penetration that might cause deterioration.
The lifestyle benefits extend beyond weather performance. Low maintenance requirements suit busy households. Durability handles the practical demands of family use. Visual customisation allows personal expression within a functionally sound framework.
Driveways for Modern and Traditional Melbourne Homes
Exposed aggregate is commonly used for driveways where both durability and appearance are important. Its ability to handle vehicle traffic while maintaining a decorative finish makes it a reliable option.
Outdoor Entertaining Areas and Patios
Exposed aggregate driveways are a popular choice for Melbourne homes, combining the durability needed for daily vehicle use with a finish that enhances overall street appeal. With a wide range of colours and textures available, they suit both modern designs and more traditional properties, allowing the surface to complement the home’s style. For new builds, exposed aggregate offers a premium, long-lasting finish that delivers both visual impact and reliable performance over time.
Pool Surrounds for Safety and Aesthetics
Pool surrounds present specific requirements: slip resistance when wet, comfort underfoot, heat management on sun-exposed surfaces, and resistance to chlorinated water splash. Exposed aggregate addresses each of these considerations when appropriate aggregates are selected.
Lighter coloured aggregates reduce heat absorption, maintaining comfortable surface temperatures during summer. Rounded pebbles provide smoother textures suitable for barefoot use while maintaining adequate slip resistance. The continuous surface eliminates joints where algae might establish or water might pool.
Popular Exposed Aggregate Finishes Available
Melbourne’s geology and established supplier network provide access to diverse aggregate types suitable for exposed concrete applications. The following options represent commonly available materials, each with distinct appearance characteristics and appropriate use cases:
Basalt (Bluestone) – Deep blue-grey to black tones with angular facets. Extremely hard with high abrasion resistance. Best suited for driveways, commercial areas, and high-traffic zones. Matches heritage Melbourne streetscapes.
Granite Chips – Available in varied colours including pink, grey, red, and cream. Coarse faceted appearance with good durability. Suitable for properties seeking warm colour tones or distinctive visual contrast.
River Pebbles – Smooth, rounded stones in mixed tan, grey, and cream colours. Creates a softer texture suitable for barefoot areas. Commonly specified for pool surrounds and residential pathways where comfort is prioritised.
Cream Pebble Blend – Light-toned rounded aggregates creating clean, modern appearances. Reduces heat absorption compared to darker stones. Popular for contemporary home designs and areas with significant sun exposure.
Charcoal Blend – Mixed dark-toned aggregates including basalt and dark granite. Creates sophisticated, low-contrast appearances that mask staining and weathering effectively. Suited for driveways and high-traffic residential areas.
Beach/Coastal Blend – Combinations of cream pebbles, crushed shell, and sand-toned aggregates. Creates finishes suited to coastal properties and beachside themes. Available in various textures from fine to medium exposure.
Mixed Heritage Blend – Aggregates selected to coordinate with established Victorian architectural styles. Typically incorporates basalt and cream tones matching period home characteristics.
Custom Project Blends – Tailored combinations designed for specific architectural requirements. Samples can be prepared to confirm appearance before project commencement.
Aggregate sizes typically available include 7mm (fine texture), 10-14mm (standard exposure), and up to 20mm for pronounced texture applications. Colour shades vary between batches due to the natural stone origin, so sample approval and consistent batch sourcing are essential for consistent project appearance.
Get Your Free Exposed Aggregate Quote Today
Service Areas
Nupave provides exposed aggregate installation and restoration services throughout Melbourne metropolitan areas and the broader region:
Melbourne Metropolitan – All suburbs including eastern, western, northern, and southern Melbourne
Mornington Peninsula – From Frankston to Portsea and surrounding areas
Bass Coast and Phillip Island – Coastal properties and township locations
West and South Gippsland – Regional service for residential and commercial projects
Our team provides free onsite quotations including site assessment, aggregate selection consultation, and detailed project pricing. We can present aggregate samples and discuss design options appropriate to your property and requirements.
Phone: Contact our office to schedule your consultation
Service commitment: Professional installation to Australian Standards with quality local aggregates
Tyabb homeowners regularly pick exposed aggregate for rural-fringe driveways. On sound existing concrete, spray-on concrete resurfacing in Tyabb offers a cost-effective way to get a similar decorative finish. Nearby suburbs like Somerville show just how popular exposed-style work has become in the area. We deliver exposed aggregate concrete Melbourne right across the Mornington Peninsula Shire.