Nupave recommended external concrete specification — Shoreham
Group 5 — Mornington Peninsula — Coastal Sand / Ridge Clay Mix
Concrete: 32 MPa (all exposed aggregate)
Indicative regional ground conditions
Shoreham is on the Mornington Peninsula, where soil profile varies significantly by pocket — from free-draining coastal sand on the flats to reactive clay on the Mt Eliza – Mt Martha ridge. Regional conditions can change block-to-block on this coast. The actual AS 2870 site classification for any individual property can only be established through a site-specific geotechnical investigation, taking into account soil profile, fill, moisture conditions and vegetation.
Regional ground movement (indicative, AS 2870)
Ground of this type may exhibit variable — from generally low on stable sand pockets to 40 mm or more on the reactive-clay ridge. This is a regional indicator only — actual movement at a given address depends on soil profile, moisture history and tree influence.
| Application | Slab thickness | Sub-base | Reinforcement |
|---|---|---|---|
| Path / foot traffic | 75–100 mm | 75 mm compacted crushed rock | SL72 |
| Driveway (cars up to 3 t) | 100 mm | 75–100 mm compacted crushed rock | SL72–SL82 |
| Occasional truck (3–10 t) | 125–150 mm | 100 mm compacted crushed rock | SL82 or rebar |
Nupave standard specification for typical conditions of this soil group — subject to site-specific assessment. Not a design substitute for a project engineer’s report where one is required.
| Saw-cut / control joint spacing (100 mm slab) | |
|---|---|
| Spacing between cuts | 2.4 m – 3.0 m (assess per block — tighter on reactive clay pockets) |
| Cut depth & timing | At least 25 mm on a 100 mm slab (¼ slab thickness). Saw-cut as soon as the concrete can be cut without excessive ravelling — timing will vary with the mix, weather and saw type. A quick trial cut on a low-visibility edge or offcut is best practice before committing to the full grid. |
| What joints do | Closer joint spacing and properly proportioned panels encourage drying-shrinkage and thermal movement to occur at planned locations. Control joints reduce the risk of random cracking; they do not prevent cracking caused by inadequate support or differential ground movement. |
| Panel shape | Keep panels close to square (length ≤ 1.5× width). Long, narrow panels are more prone to random cracking regardless of joint spacing. |
Concrete grade
All Nupave exposed aggregate is poured at N32 as standard, regardless of soil group. The aggregate-exposure process removes the top cement paste layer, so the slab benefits from the higher compressive strength, improved durability and better abrasion resistance of N32. For non-exposed external concrete work, Nupave specifies N25 or N32 depending on application, anticipated loading, exposure conditions, selected finish and any site-specific engineering requirements. Concrete strength alone does not compensate for inadequate subgrade preparation, drainage or ground movement — it is one element within a properly detailed slab system.
Slip layer (poly membrane)
A polyethylene separation or slip membrane may be considered where required by the slab design or site conditions. It can reduce friction between the slab and compacted base during concrete shrinkage, but does not prevent settlement, heave or other vertical ground movement. Where a project engineer or geotechnical report specifies membrane use, that specification takes precedence.
Sub-base — why it’s a key part of the quote
Correct excavation, drainage, and a uniformly compacted crushed-rock base significantly reduce settlement and provide consistent support under the slab. It adds cost — both in laying and compacting the base, and in the extra excavation and spoil-removal that comes with the deeper dig — but that preparation is what a slab needs to perform over the long term. The preparation actually required may vary where uncontrolled fill, soft areas or unsuitable material are encountered on the specific site.
Curing coat
Concrete requires curing to develop its full design strength and durability. A liquid curing coat is applied after finishing, once bleed water has disappeared and in accordance with the manufacturer's requirements. It seals moisture into the concrete so hydration continues over the first 7 days — when the concrete's real strength develops. In summer, hot dry weather removes surface moisture quickly, so curing coat is essential to prevent surface crazing and reduced final strength. In winter, lower temperatures slow hydration, so curing is still required to reach design strength — the curing coat is still applied, and duration may need to be extended. Nupave applies curing coat as standard on all pours year-round.
Microfibres in concrete mix Optional add-on
What fibres actually do. Microfibres (polypropylene) get mixed through the whole pour and mainly control plastic shrinkage cracking in the first 24 hours, plus improve abrasion / impact resistance — they don’t add real structural tensile capacity. Macrofibres (heavier synthetic or steel) go further, adding post-crack toughness and some flexural strength.
Genuine benefit as an add-on: reduces fine / hairline shrinkage cracking and improves durability on any slab, sand or clay.
Should NOT replace mesh on soft or highly plastic clay soils: fibres provide no real resistance to the larger, ground-movement-driven cracks that mesh or rebar controls.
Salt / coastal exposure
Salt / wind exposure applies on foreshore-proximate sites (Portsea, Sorrento, Rye, Rosebud, Dromana, Mount Martha and similar). Nupave uses B1/B2 exposure classification (N32 minimum) and increases concrete cover to reinforcement in these zones to protect against saline-induced corrosion.
Important: This is Nupave’s enhanced standard specification for typical conditions in this suburb group, and is presented as a general reference. It is not a site-specific engineering design. Actual specifications for any individual property may vary based on site conditions, uncontrolled fill, tree influence, drainage, or requirements identified in a site-specific geotechnical or engineer’s report. Where an engineered design has been prepared for the site, that design takes precedence.
Professional Exposed Aggregate Installation and Restoration
Just roughly 75 km south of Melbourne CBD, Shoreham is a quiet, rural-coastal community on the southern Peninsula. With the range of properties across Shoreham, exposed aggregate provides a versatile surface finish that works with any architectural style.
Exposed aggregate concrete delivers a durable, slip-resistant finish that reveals natural stone textures beneath the cement surface—combining structural performance with decorative appeal for Melbourne properties.
Nupave specialises in exposed aggregate installation and restoration across Melbourne, the Mornington Peninsula, Bass Coast, Phillip Island, and surrounding regions. Our team handles everything from new driveways and pool surrounds to commercial flooring projects, using locally sourced aggregates and installation methods that meet Australian Standards.
Why Exposed Aggregate Concrete is Perfect for Melbourne Properties
Low Maintenance Requirements When Properly Sealed
Exposed aggregate concrete requires relatively low maintenance compared to many alternative exterior materials when the surface is properly sealed after installation. The primary ongoing requirement is periodic resealing—typically every two to three years, though high-traffic areas or surfaces with significant UV exposure may benefit from more frequent attention. This resealing protects against staining, helps resist water penetration, and maintains the visual enhancement that quality sealers provide.
General cleaning involves hosing down the surface and occasional washing with mild detergent to remove accumulated dirt, leaves, and other contaminants. Pressure washing can be used but should be applied at lower pressure settings and appropriate angles to avoid dislodging aggregate or damaging the sealer layer. Oil stains and spills should be cleaned promptly to prevent absorption into the concrete matrix.
Compared to pavers—which require joint sand replenishment, weed control, and periodic realignment—exposed aggregate presents fewer maintenance tasks. The continuous surface eliminates joints where weeds establish and where ants create sand displacement. Compared to timber decking or other materials requiring annual treatments, exposed aggregate offers a more straightforward maintenance schedule focused primarily on cleaning and periodic sealing.
What Exposed Aggregate Concrete Is and How It’s Created
Exposed aggregate concrete is a decorative concrete finish created by removing the top layer of cement paste to reveal the natural stone, pebbles, and gravel embedded within the mix. This process produces a textured, visually distinctive surface that differs significantly from plain finished concrete. The aggregate—whether basalt, granite, river pebbles, or crushed quartz—becomes the dominant visual element, creating surfaces that range from subtle stone exposure to pronounced decorative textures depending on the desired appearance.
Unlike standard concrete where the aggregate remains hidden beneath a smooth cement surface, exposed aggregate incorporates natural stones as a visible design feature. The variation in stone size, shape, and colour allows for a customised appearance, with each installation carrying a unique character determined by the specific aggregate blend selected. This method has been used in Melbourne for decades, with local suppliers offering aggregate options sourced from Victorian quarries—primarily basalt from the Newer and Older Volcanics geological formations, along with granite and sedimentary rock materials.
The finish is achieved through a controlled washing process where the surface layer of concrete is exposed at a precise timing window. Surface retarders are applied to delay cement paste hardening on the top layer, allowing contractors to wash away the cement and reveal the underlying aggregate without dislodging the stones. This technique requires careful control—exposure too early risks aggregate loss, while waiting too long makes the cement paste difficult to remove. The result is a surface where approximately one-third of the smallest aggregate size becomes visible, creating the characteristic textured appearance.
Visual Appeal and Customisation Options
Exposed aggregate offers strong visual appeal through the natural beauty of stone, rather than relying on artificial colours or patterns. With a wide range of aggregates available—such as basalt, granite, and river pebbles—finishes can be tailored to suit different home styles and outdoor spaces. Variations in stone size and blend allow for further customisation, creating anything from subtle, refined textures to more pronounced, decorative finishes.
Our Exposed Aggregate Services
Residential Exposed Aggregate
We provide custom exposed aggregate installations for residential properties across Melbourne, with each project tailored to suit the home’s style, usage, and site conditions. Driveways, pathways, patios, and pool surrounds are designed with the right aggregate selection, reinforcement, and drainage to ensure both visual appeal and long-term performance. Where suitable, we also assess existing concrete for resurfacing options, offering a cost-effective alternative to full replacement when the slab is structurally sound.
Is New Concrete Always Necessary?
Before committing to new exposed aggregate concrete, it’s worth having your existing surface professionally assessed. In many cases, concrete that appears worn, outdated, or damaged can be restored or resurfaced at a significantly lower cost than full replacement. A proper evaluation can help determine whether excavation is actually necessary, potentially saving thousands while still achieving a high-quality finish. Getting expert advice first ensures you’re making the right decision based on the condition of your current concrete, not just assumptions.
We’ll walk you through your options clearly so you can make the right decision without pressure.
Exposed Aggregate Applications Across Melbourne
Benefits for Melbourne’s Climate and Lifestyle
Exposed aggregate performs well in Melbourne’s variable climate, offering resistance to UV exposure, reliable traction in wet conditions, and durability through changing temperatures. When properly installed and sealed, it protects against moisture while maintaining its appearance over time. Its low-maintenance nature and range of custom finishes also make it a practical and versatile choice for modern Melbourne lifestyles.
Commercial Entrances and High-Traffic Areas
Commercial properties benefit from exposed aggregate’s professional appearance and durability under high pedestrian loads. Building entrances, plaza surfaces, and connecting pathways present the property favourably while handling traffic volumes that would deteriorate less durable finishes.
The reduced maintenance requirements compared to pavers or specialist decorative treatments lower ongoing property management costs. Proper specification—typically N40 strength grades with harder aggregate types like basalt or granite—ensures commercial installations handle the demands of public use.
Outdoor Entertaining Areas and Patios
Melbourne’s lifestyle emphasises outdoor entertaining, making patios and outdoor living areas significant investments in residential properties. Exposed aggregate provides surfaces that handle furniture placement, foot traffic, and the occasional dropped item while maintaining an attractive appearance that complements landscaping and architectural elements.
The natural stone appearance of exposed aggregate integrates well with garden settings, creating visual connections between built and planted areas. Texture options allow selection of finishes that balance appearance with barefoot comfort—medium exposure river pebble blends typically suit these applications well.
Our Professional Installation Process
Step 1: Site Assessment and Design
Every exposed aggregate project begins with onsite evaluation of existing conditions. This assessment covers soil characteristics—particularly important in Melbourne where reactive clay soils are common and require specific preparation approaches. Drainage requirements, access constraints, existing services, and slope conditions inform both design and construction planning.
Aggregate selection occurs during this consultation phase. We present samples of available aggregate types and blends, discussing how different options suit your property’s architecture, landscaping, and intended use. Colour coordination with house materials, preferred texture levels, and budget considerations guide the final aggregate specification.
Step 2: Preparation and Base Work
Proper preparation determines long-term performance. Excavation removes existing material to required depth, accounting for base layer thickness, concrete slab depth, and finished surface level relative to surrounding elements. In reactive soil areas, additional depth or moisture management measures may be incorporated.
Base preparation involves placing and compacting crushed rock to create a stable foundation. Compaction achieves approximately 95% Modified Proctor density to prevent future settlement. Reinforcement installation—typically steel mesh for residential applications or bar reinforcement for heavy-duty commercial use—provides tensile strength to resist cracking under load and thermal movement.
Formwork establishes edge profiles and levels, with careful attention to drainage falls directing water away from buildings and towards appropriate discharge points. Control joint locations are planned during this phase, positioning cuts to accommodate shrinkage cracking at predetermined locations rather than allowing random crack development.
Step 3: Concrete Pour and Finishing
Concrete placement requires coordination with batch plant delivery schedules and site readiness. The mix specification—strength grade, aggregate size, slump, and any admixtures—follows AS 1379 requirements appropriate to the project. Common specifications include N32 or N40 grades with 20mm maximum aggregate size for residential driveways.
Placement, spreading, and initial levelling occur immediately following delivery. Bull float and finishing tools work the surface to achieve correct levels while consolidating the concrete without segregating the aggregate. The timing of subsequent operations depends on ambient temperature, humidity, and mix characteristics.
Surface retarder application must occur within specific time windows—typically when the concrete has firmed sufficiently to walk on but before the surface cement paste hardens fully. This retarder delays paste set at the surface while allowing the underlying concrete to continue curing, creating the differential hardening that enables controlled aggregate exposure.
Step 4: Cleaning, Sealing and Protection
The washing process removes retarder-affected cement paste to reveal the aggregate beneath. Timing is critical—typically 4 to 24 hours after placement depending on conditions and retarder type. Pressure washing at appropriate settings removes the paste layer without dislodging aggregate or creating uneven exposure.
Once washed and allowed to dry, the surface receives protective sealer application. Quality sealers penetrate the concrete surface and coat the exposed aggregate, protecting against oil stains, water absorption, and UV effects while enhancing the natural stone colours. Full cure of both concrete and sealer typically requires several days before the surface can accept vehicle traffic.
Ongoing protection depends on periodic resealing—typically every two to three years—and prompt attention to any stains or spills that could penetrate the sealer layer.
Concrete Services in Shoreham
Frequently Asked Questions
How long does exposed aggregate concrete last?
When installed correctly and properly maintained, exposed aggregate concrete can last for many years. Its durability makes it suitable for high-traffic areas such as driveways and outdoor spaces.
Is exposed aggregate suitable for Melbourne’s weather?
Exposed aggregate performs well in Melbourne’s climate conditions. The natural stone aggregates resist UV degradation that affects coloured or stamped concrete treatments. The textured surface provides reliable traction during wet weather—valuable given Melbourne’s rainfall distribution throughout the year.
Temperature variations in Melbourne rarely approach freeze-thaw conditions that damage concrete in colder climates, reducing one potential deterioration mechanism. Proper installation with attention to drainage prevents water ponding that might cause localised deterioration. The slip resistant properties suit Melbourne’s frequent rain events, maintaining safety for pedestrians and vehicle traction for driveways.
Coastal areas within our service region require attention to salt exposure, with appropriate sealer selection for marine environments.
Can exposed aggregate be installed over existing concrete?
Exposed aggregate overlays can be applied over existing concrete surfaces that are structurally sound—no significant cracking, no active settlement, and adequate adhesion between old and new surfaces. This resurfacing approach provides a cost-effective alternative to complete removal and replacement where the existing base is serviceable.
Assessment of existing concrete condition is essential before recommending overlay installation. Surfaces with structural cracks, active movement, or delamination require repair or replacement rather than overlay. Where overlay is appropriate, specialised bonding techniques and overlay mixes ensure the new exposed aggregate surface adheres properly and performs as expected.
Is exposed aggregate suitable for driveways?
Yes, exposed aggregate is widely used for driveways due to its strength and ability to handle vehicle traffic. Its textured surface also provides additional grip compared to plain concrete.
Get Your Free Exposed Aggregate Quote Today
Service Areas
Nupave provides exposed aggregate installation and restoration services throughout Melbourne metropolitan areas and the broader region:
Melbourne Metropolitan – All suburbs including eastern, western, northern, and southern Melbourne
Mornington Peninsula – From Frankston to Portsea and surrounding areas
Bass Coast and Phillip Island – Coastal properties and township locations
West and South Gippsland – Regional service for residential and commercial projects
Our team provides free onsite quotations including site assessment, aggregate selection consultation, and detailed project pricing. We can present aggregate samples and discuss design options appropriate to your property and requirements.
Phone: Contact our office to schedule your consultation
Service commitment: Professional installation to Australian Standards with quality local aggregates
Shoreham homes often use exposed aggregate to complement coastal and vineyard settings. On sound existing concrete, spray-on concrete resurfacing in Shoreham offers a cost-effective way to get a similar decorative finish. Nearby suburbs like Flinders show just how popular exposed-style work has become in the area. We deliver exposed aggregate concrete Melbourne services right across the Mornington Peninsula Shire.