Nupave recommended external concrete specification — Malvern
Group 1 — Bayside / Sand Belt — Brighton Group Sands
Concrete: 32 MPa (all exposed aggregate)
Indicative regional ground conditions
Malvern sits on the Bayside / Sand Belt, where the natural profile is dominated by free-draining Brighton Group sands. Regional ground conditions are generally stable and low-reactivity, though loose sand pockets can require additional compaction. The actual AS 2870 site classification for any individual property can only be established through a site-specific geotechnical investigation, taking into account soil profile, fill, moisture conditions and vegetation.
Regional ground movement (indicative, AS 2870)
Ground of this type may exhibit generally low seasonal surface movement (indicatively under 20 mm). This is a regional indicator only — actual movement at a given address depends on soil profile, moisture history and tree influence.
| Application | Slab thickness | Sub-base | Reinforcement |
|---|---|---|---|
| Path / foot traffic | 75–100 mm | 50–75 mm compacted crushed rock | SL72 |
| Driveway (cars up to 3 t) | 100 mm | 75–100 mm compacted crushed rock | SL72–SL82 |
| Occasional truck (3–10 t) | 125–150 mm | 100 mm compacted crushed rock | SL82 or rebar |
Nupave standard specification for typical conditions of this soil group — subject to site-specific assessment. Not a design substitute for a project engineer’s report where one is required.
| Saw-cut / control joint spacing (100 mm slab) | |
|---|---|
| Spacing between cuts | 2.7 m – 3.0 m (standard spacing) |
| Cut depth & timing | At least 25 mm on a 100 mm slab (¼ slab thickness). Saw-cut as soon as the concrete can be cut without excessive ravelling — timing will vary with the mix, weather and saw type. A quick trial cut on a low-visibility edge or offcut is best practice before committing to the full grid. |
| What joints do | Closer joint spacing and properly proportioned panels encourage drying-shrinkage and thermal movement to occur at planned locations. Control joints reduce the risk of random cracking; they do not prevent cracking caused by inadequate support or differential ground movement. |
| Panel shape | Keep panels close to square (length ≤ 1.5× width). Long, narrow panels are more prone to random cracking regardless of joint spacing. |
Concrete grade
All Nupave exposed aggregate is poured at N32 as standard, regardless of soil group. The aggregate-exposure process removes the top cement paste layer, so the slab benefits from the higher compressive strength, improved durability and better abrasion resistance of N32. For non-exposed external concrete work, Nupave specifies N25 or N32 depending on application, anticipated loading, exposure conditions, selected finish and any site-specific engineering requirements. Concrete strength alone does not compensate for inadequate subgrade preparation, drainage or ground movement — it is one element within a properly detailed slab system.
Slip layer (poly membrane)
A polyethylene separation or slip membrane may be considered where required by the slab design or site conditions. It can reduce friction between the slab and compacted base during concrete shrinkage, but does not prevent settlement, heave or other vertical ground movement. Where a project engineer or geotechnical report specifies membrane use, that specification takes precedence.
Sub-base — why it’s a key part of the quote
Correct excavation, drainage, and a uniformly compacted crushed-rock base significantly reduce settlement and provide consistent support under the slab. It adds cost — both in laying and compacting the base, and in the extra excavation and spoil-removal that comes with the deeper dig — but that preparation is what a slab needs to perform over the long term. The preparation actually required may vary where uncontrolled fill, soft areas or unsuitable material are encountered on the specific site.
Curing coat
Concrete requires curing to develop its full design strength and durability. A liquid curing coat is applied after finishing, once bleed water has disappeared and in accordance with the manufacturer's requirements. It seals moisture into the concrete so hydration continues over the first 7 days — when the concrete's real strength develops. In summer, hot dry weather removes surface moisture quickly, so curing coat is essential to prevent surface crazing and reduced final strength. In winter, lower temperatures slow hydration, so curing is still required to reach design strength — the curing coat is still applied, and duration may need to be extended. Nupave applies curing coat as standard on all pours year-round.
Microfibres in concrete mix Optional add-on
What fibres actually do. Microfibres (polypropylene) get mixed through the whole pour and mainly control plastic shrinkage cracking in the first 24 hours, plus improve abrasion / impact resistance — they don’t add real structural tensile capacity. Macrofibres (heavier synthetic or steel) go further, adding post-crack toughness and some flexural strength.
Genuine benefit as an add-on: reduces fine / hairline shrinkage cracking and improves durability on any slab, sand or clay.
Should NOT replace mesh on soft or highly plastic clay soils: fibres provide no real resistance to the larger, ground-movement-driven cracks that mesh or rebar controls.
Salt / coastal exposure
Suburbs within roughly 1 km of Port Phillip Bay are subject to salt spray. Nupave uses B1 exposure classification (N32 minimum) and increases concrete cover to reinforcement on foreshore-proximate work to protect against saline-induced corrosion.
Important: This is Nupave’s enhanced standard specification for typical conditions in this suburb group, and is presented as a general reference. It is not a site-specific engineering design. Actual specifications for any individual property may vary based on site conditions, uncontrolled fill, tree influence, drainage, or requirements identified in a site-specific geotechnical or engineer’s report. Where an engineered design has been prepared for the site, that design takes precedence.
Exposed Aggregate Concrete for Driveways and Entryways Malvern
Professional Exposed Aggregate Installation and Restoration
Just approximately 9 km southeast of Melbourne CBD, Malvern is an established prestige suburb with tree-lined streets and heritage architecture. Local attractions include Glenferrie Road shopping precinct, Malvern Gardens, and Central Park. Whether you’re upgrading an existing driveway or finishing a new build in Malvern, exposed aggregate delivers a durable and visually appealing result.
Exposed aggregate concrete delivers a durable, slip-resistant finish that reveals natural stone textures beneath the cement surface—combining structural performance with decorative appeal for Melbourne properties.
Nupave specialises in exposed aggregate installation and restoration across Melbourne, the Mornington Peninsula, Bass Coast, Phillip Island, and surrounding regions. Our team handles everything from new driveways and pool surrounds to commercial flooring projects, using locally sourced aggregates and installation methods that meet Australian Standards.
Why Exposed Aggregate Concrete is Perfect for Melbourne Properties
Low Maintenance Requirements When Properly Sealed
Exposed aggregate concrete requires relatively low maintenance compared to many alternative exterior materials when the surface is properly sealed after installation. The primary ongoing requirement is periodic resealing—typically every two to three years, though high-traffic areas or surfaces with significant UV exposure may benefit from more frequent attention. This resealing protects against staining, helps resist water penetration, and maintains the visual enhancement that quality sealers provide.
General cleaning involves hosing down the surface and occasional washing with mild detergent to remove accumulated dirt, leaves, and other contaminants. Pressure washing can be used but should be applied at lower pressure settings and appropriate angles to avoid dislodging aggregate or damaging the sealer layer. Oil stains and spills should be cleaned promptly to prevent absorption into the concrete matrix.
Compared to pavers—which require joint sand replenishment, weed control, and periodic realignment—exposed aggregate presents fewer maintenance tasks. The continuous surface eliminates joints where weeds establish and where ants create sand displacement. Compared to timber decking or other materials requiring annual treatments, exposed aggregate offers a more straightforward maintenance schedule focused primarily on cleaning and periodic sealing.
What Exposed Aggregate Concrete Is and How It’s Created
Exposed aggregate concrete is a decorative finish created by removing the top layer of cement to reveal the natural stone within the mix. This produces a textured, visually distinctive surface, with the chosen aggregate—such as basalt, granite, or river pebbles—defining the overall look. The finish is achieved through a controlled process that exposes the stone at the right time, resulting in a durable surface that combines natural appearance with long-term performance.
Durability Compared to Plain Concrete and Other Decorative Options
Exposed aggregate concrete offers durability equal to or greater than plain concrete, with the added benefit of longer-lasting visual appeal. By using natural stone as the wearing surface, it resists abrasion, staining, and weathering far better than standard finishes, making it ideal for driveways and high-traffic areas. Compared to options like pavers or stamped concrete, it provides a more stable, low-maintenance surface that performs reliably over time.
Visual Appeal and Customisation Options
Exposed aggregate delivers aesthetic appeal through the natural beauty of stone rather than applied colours or stamped patterns. The range of available aggregates—from deep blue-grey basalt to warm-toned granite, from smooth cream river pebbles to sparkling crushed quartz—allows property owners to select finishes that complement their home’s architecture, landscaping, and personal preferences.
Customisation extends beyond simple colour selection. Aggregate size affects the visual texture and feel of the finished product, with options typically ranging from 7mm to 20mm nominal sizes. Smaller aggregates (7mm) create finer textures suitable for areas where barefoot comfort is prioritised, while larger aggregates (14-20mm) produce more pronounced textures appropriate for driveways and high-traffic commercial applications.
Blended aggregates allow for further design control, combining different stone types to create specific colour combinations or visual effects. Some installations incorporate accent aggregates—crushed shells for coastal properties, distinctive quartzite for contemporary designs—to achieve particular design outcomes. This level of customisation means exposed aggregate can suit both modern architectural styles and traditional Melbourne homes, adapting to diverse aesthetic requirements.
Is New Concrete Always Necessary?
Before committing to new exposed aggregate concrete, it’s worth having your existing surface professionally assessed. In many cases, concrete that appears worn, outdated, or damaged can be restored or resurfaced at a significantly lower cost than full replacement. A proper evaluation can help determine whether excavation is actually necessary, potentially saving thousands while still achieving a high-quality finish. Getting expert advice first ensures you’re making the right decision based on the condition of your current concrete, not just assumptions.
Many homeowners assume that worn or dated concrete needs to be completely replaced, but that isn’t always the case. Before committing to new exposed aggregate, a proper assessment can determine whether the existing slab is suitable for improvement rather than removal. This approach can reduce costs, minimise disruption, and still deliver a high-quality finish.
We’re happy to assess your concrete and give you an honest answer
Our Exposed Aggregate Services
Residential Exposed Aggregate
We provide custom exposed aggregate installations for residential properties across Melbourne, with each project tailored to suit the home’s style, usage, and site conditions. Driveways, pathways, patios, and pool surrounds are designed with the right aggregate selection, reinforcement, and drainage to ensure both visual appeal and long-term performance. Where suitable, we also assess existing concrete for resurfacing options, offering a cost-effective alternative to full replacement when the slab is structurally sound.
Commercial Exposed Aggregate Flooring
Exposed aggregate is well suited to commercial applications, offering a durable, low-maintenance surface that performs under high pedestrian traffic while maintaining a professional appearance. It is commonly used for entrances, walkways, and outdoor areas, with finishes selected to align with the overall site design. When specified and installed correctly, it meets relevant standards and provides a long-lasting solution for both private and public spaces.
Popular Exposed Aggregate Finishes Available
Melbourne’s geology and established supplier network provide access to diverse aggregate types suitable for exposed concrete applications. The following options represent commonly available materials, each with distinct appearance characteristics and appropriate use cases:
- Basalt (Bluestone) – Deep blue-grey to black tones with angular facets. Extremely hard with high abrasion resistance. Best suited for driveways, commercial areas, and high-traffic zones. Matches heritage Melbourne streetscapes.
- Granite Chips – Available in varied colours including pink, grey, red, and cream. Coarse faceted appearance with good durability. Suitable for properties seeking warm colour tones or distinctive visual contrast.
- River Pebbles – Smooth, rounded stones in mixed tan, grey, and cream colours. Creates a softer texture suitable for barefoot areas. Commonly specified for pool surrounds and residential pathways where comfort is prioritised.
- Crushed Quartzite – White or translucent crystalline appearance with high brightness. Creates a contemporary aesthetic with striking visual impact. Higher cost than standard aggregates; best used for feature areas or accent applications.
- Cream Pebble Blend – Light-toned rounded aggregates creating clean, modern appearances. Reduces heat absorption compared to darker stones. Popular for contemporary home designs and areas with significant sun exposure.
- Warm Earth Tones – Blends incorporating brown, rust, and ochre-coloured stones. Creates a rustic appearance complementing natural landscaping and timber elements. Appropriate for properties seeking organic aesthetic integration.
- Beach/Coastal Blend – Combinations of cream pebbles, crushed shell, and sand-toned aggregates. Creates finishes suited to coastal properties and beachside themes. Available in various textures from fine to medium exposure.
- Custom Project Blends – Tailored combinations designed for specific architectural requirements. Samples can be prepared to confirm appearance before project commencement.
Aggregate sizes typically available include 7mm (fine texture), 10-14mm (standard exposure), and up to 20mm for pronounced texture applications. Colour shades vary between batches due to the natural stone origin, so sample approval and consistent batch sourcing are essential for consistent project appearance.
Get Your Free Exposed Aggregate Quote Today
Nupave provides professional exposed aggregate installations across Melbourne and surrounding regions, including metropolitan Melbourne, the Mornington Peninsula, Bass Coast, and West and South Gippsland.
Every project begins with a free onsite consultation, where we assess your site conditions, discuss design options, and help you select the right aggregate to suit your property. You’ll receive clear, detailed pricing along with expert advice to ensure you’re making the right decision from the start.
Our commitment is to deliver high-quality workmanship using premium local materials, installed to Australian Standards for long-term performance.
Contact us today to arrange your consultation.
Malvern’s grand period homes demand concrete that holds up to the architecture — cracked and faded slabs drag the whole kerb appeal down. If the base concrete is still structurally sound, concrete resurfacing in Malvern can mimic an exposed-style finish without tearing it up. Across nearby locations such as Armadale, exposed aggregate is a go-to for homeowners chasing a premium look. Our exposed aggregate concrete Melbourne service covers the full City of Stonnington.