Nupave recommended external concrete specification — Heatherton
Group 1 — Bayside / Sand Belt — Brighton Group Sands
Concrete: 32 MPa (all exposed aggregate)
Indicative regional ground conditions
Heatherton sits on the Bayside / Sand Belt, where the natural profile is dominated by free-draining Brighton Group sands. Regional ground conditions are generally stable and low-reactivity, though loose sand pockets can require additional compaction. The actual AS 2870 site classification for any individual property can only be established through a site-specific geotechnical investigation, taking into account soil profile, fill, moisture conditions and vegetation.
Regional ground movement (indicative, AS 2870)
Ground of this type may exhibit generally low seasonal surface movement (indicatively under 20 mm). This is a regional indicator only — actual movement at a given address depends on soil profile, moisture history and tree influence.
| Application | Slab thickness | Sub-base | Reinforcement |
|---|---|---|---|
| Path / foot traffic | 75–100 mm | 50–75 mm compacted crushed rock | SL72 |
| Driveway (cars up to 3 t) | 100 mm | 75–100 mm compacted crushed rock | SL72–SL82 |
| Occasional truck (3–10 t) | 125–150 mm | 100 mm compacted crushed rock | SL82 or rebar |
Nupave standard specification for typical conditions of this soil group — subject to site-specific assessment. Not a design substitute for a project engineer’s report where one is required.
| Saw-cut / control joint spacing (100 mm slab) | |
|---|---|
| Spacing between cuts | 2.7 m – 3.0 m (standard spacing) |
| Cut depth & timing | At least 25 mm on a 100 mm slab (¼ slab thickness). Saw-cut as soon as the concrete can be cut without excessive ravelling — timing will vary with the mix, weather and saw type. A quick trial cut on a low-visibility edge or offcut is best practice before committing to the full grid. |
| What joints do | Closer joint spacing and properly proportioned panels encourage drying-shrinkage and thermal movement to occur at planned locations. Control joints reduce the risk of random cracking; they do not prevent cracking caused by inadequate support or differential ground movement. |
| Panel shape | Keep panels close to square (length ≤ 1.5× width). Long, narrow panels are more prone to random cracking regardless of joint spacing. |
Concrete grade
All Nupave exposed aggregate is poured at N32 as standard, regardless of soil group. The aggregate-exposure process removes the top cement paste layer, so the slab benefits from the higher compressive strength, improved durability and better abrasion resistance of N32. For non-exposed external concrete work, Nupave specifies N25 or N32 depending on application, anticipated loading, exposure conditions, selected finish and any site-specific engineering requirements. Concrete strength alone does not compensate for inadequate subgrade preparation, drainage or ground movement — it is one element within a properly detailed slab system.
Slip layer (poly membrane)
A polyethylene separation or slip membrane may be considered where required by the slab design or site conditions. It can reduce friction between the slab and compacted base during concrete shrinkage, but does not prevent settlement, heave or other vertical ground movement. Where a project engineer or geotechnical report specifies membrane use, that specification takes precedence.
Sub-base — why it’s a key part of the quote
Correct excavation, drainage, and a uniformly compacted crushed-rock base significantly reduce settlement and provide consistent support under the slab. It adds cost — both in laying and compacting the base, and in the extra excavation and spoil-removal that comes with the deeper dig — but that preparation is what a slab needs to perform over the long term. The preparation actually required may vary where uncontrolled fill, soft areas or unsuitable material are encountered on the specific site.
Curing coat
Concrete requires curing to develop its full design strength and durability. A liquid curing coat is applied after finishing, once bleed water has disappeared and in accordance with the manufacturer's requirements. It seals moisture into the concrete so hydration continues over the first 7 days — when the concrete's real strength develops. In summer, hot dry weather removes surface moisture quickly, so curing coat is essential to prevent surface crazing and reduced final strength. In winter, lower temperatures slow hydration, so curing is still required to reach design strength — the curing coat is still applied, and duration may need to be extended. Nupave applies curing coat as standard on all pours year-round.
Microfibres in concrete mix Optional add-on
What fibres actually do. Microfibres (polypropylene) get mixed through the whole pour and mainly control plastic shrinkage cracking in the first 24 hours, plus improve abrasion / impact resistance — they don’t add real structural tensile capacity. Macrofibres (heavier synthetic or steel) go further, adding post-crack toughness and some flexural strength.
Genuine benefit as an add-on: reduces fine / hairline shrinkage cracking and improves durability on any slab, sand or clay.
Should NOT replace mesh on soft or highly plastic clay soils: fibres provide no real resistance to the larger, ground-movement-driven cracks that mesh or rebar controls.
Salt / coastal exposure
Suburbs within roughly 1 km of Port Phillip Bay are subject to salt spray. Nupave uses B1 exposure classification (N32 minimum) and increases concrete cover to reinforcement on foreshore-proximate work to protect against saline-induced corrosion.
Important: This is Nupave’s enhanced standard specification for typical conditions in this suburb group, and is presented as a general reference. It is not a site-specific engineering design. Actual specifications for any individual property may vary based on site conditions, uncontrolled fill, tree influence, drainage, or requirements identified in a site-specific geotechnical or engineer’s report. Where an engineered design has been prepared for the site, that design takes precedence.
Exposed Aggregate Concrete for Driveways and Entryways Heatherton
Professional Exposed Aggregate Installation and Restoration
Just around 22 km southeast of Melbourne CBD, Heatherton is a semi-rural pocket with market gardens alongside residential areas. Heatherton sits within the Kingston corridor, an area with growing demand for quality home improvements. Exposed aggregate is well-suited to Heatherton’s mix of property styles, offering a finish that complements both older homes and newer builds. With Melbourne’s varied weather, Heatherton homeowners value surfaces that look good year-round without constant upkeep.
Exposed aggregate concrete delivers a durable, slip-resistant finish that reveals natural stone textures beneath the cement surface—combining structural performance with decorative appeal for Melbourne properties.
Nupave specialises in exposed aggregate installation and restoration across Melbourne, the Mornington Peninsula, Bass Coast, Phillip Island, and surrounding regions. Our team handles everything from new driveways and pool surrounds to commercial flooring projects, using locally sourced aggregates and installation methods that meet Australian Standards.
Why Exposed Aggregate Concrete is Perfect for Melbourne Properties
Low Maintenance Requirements When Properly Sealed
Exposed aggregate concrete requires relatively low maintenance compared to many alternative exterior materials when the surface is properly sealed after installation. The primary ongoing requirement is periodic resealing—typically every two to three years, though high-traffic areas or surfaces with significant UV exposure may benefit from more frequent attention. This resealing protects against staining, helps resist water penetration, and maintains the visual enhancement that quality sealers provide.
General cleaning involves hosing down the surface and occasional washing with mild detergent to remove accumulated dirt, leaves, and other contaminants. Pressure washing can be used but should be applied at lower pressure settings and appropriate angles to avoid dislodging aggregate or damaging the sealer layer. Oil stains and spills should be cleaned promptly to prevent absorption into the concrete matrix.
Compared to pavers—which require joint sand replenishment, weed control, and periodic realignment—exposed aggregate presents fewer maintenance tasks. The continuous surface eliminates joints where weeds establish and where ants create sand displacement. Compared to timber decking or other materials requiring annual treatments, exposed aggregate offers a more straightforward maintenance schedule focused primarily on cleaning and periodic sealing.
At Nupave, our commitment to our clients extends well beyond the completion of your project. We understand that ongoing maintenance is essential, but also easily overlooked in busy day-to-day life. That’s why every project is added to our exclusive care register, allowing us to provide timely reminders when your concrete is due for resealing. This service is provided at no cost as part of our standard — not as an add-on — ensuring your investment remains protected and continues to perform at its best. It’s a simple, proactive approach designed to give you long-term results without the need to manage it yourself.
Slip-Resistant Texture Ideal for Melbourne’s Variable Weather
Exposed aggregate provides natural slip resistance thanks to its textured surface, making it ideal for Melbourne’s wet and variable conditions. The exposed stones create added grip underfoot and under tyres, which is especially beneficial for driveways, pathways, and pool surrounds. When installed correctly, it offers a balance of safety and comfort suited to both everyday use and high-moisture areas.
Visual Appeal and Customisation Options
Exposed aggregate offers strong visual appeal through the natural beauty of stone, rather than relying on artificial colours or patterns. With a wide range of aggregates available—such as basalt, granite, and river pebbles—finishes can be tailored to suit different home styles and outdoor spaces. Variations in stone size and blend allow for further customisation, creating anything from subtle, refined textures to more pronounced, decorative finishes.
Long-Lasting Performance for High-Traffic Areas
Exposed aggregate is designed to handle high-traffic areas, combining structural concrete strength with durable natural stone to withstand daily vehicle use and foot traffic. When installed with the correct strength, reinforcement, and preparation, it delivers long-term performance without significant wear. This makes it a reliable choice for driveways and other areas where durability is essential.
Is New Concrete Always Necessary?
Before committing to new exposed aggregate concrete, it’s worth having your existing surface professionally assessed. In many cases, concrete that appears worn, outdated, or damaged can be restored or resurfaced at a significantly lower cost than full replacement. A proper evaluation can help determine whether excavation is actually necessary, potentially saving thousands while still achieving a high-quality finish. Getting expert advice first ensures you’re making the right decision based on the condition of your current concrete, not just assumptions.
Many homeowners assume that worn or dated concrete needs to be completely replaced, but that isn’t always the case. Before committing to new exposed aggregate, a proper assessment can determine whether the existing slab is suitable for improvement rather than removal. This approach can reduce costs, minimise disruption, and still deliver a high-quality finish.
Our goal is to find the right solution for your concrete, whether that’s resurfacing, repairs, or replacement.
Our Exposed Aggregate Services
Residential Exposed Aggregate
We create custom exposed aggregate installations for residential properties throughout Melbourne and surrounding areas. New driveways benefit from aggregate selection tailored to complement house colours and landscaping, with slab thickness and reinforcement designed for household vehicle loads and local soil conditions.
Pathways, patios, and outdoor entertaining areas receive the same attention to design and construction detail. Pool surrounds utilise aggregate types selected for barefoot comfort and slip resistance, with drainage slopes directing water away from the pool edge and house foundations.
Exposed aggregate resurfacing provides an option for existing concrete surfaces in sound structural condition. This overlay approach can transform plain or deteriorating concrete into attractive exposed aggregate finishes without the full excavation and base preparation required for new installations. Our consultation process assesses whether resurfacing is appropriate for each specific situation based on existing concrete condition and intended use.
Commercial Exposed Aggregate Flooring
Commercial projects demand attention to compliance requirements, traffic loads, and design integration with broader site development. Office building entrances and corporate walkways benefit from exposed aggregate’s professional appearance and minimal maintenance requirements, reducing ongoing management costs while enhancing property presentation.
Retail and hospitality applications utilise exposed aggregate for outdoor dining areas, shopping centre walkways, and entrance features. The durability handles high pedestrian volumes while the range of available finishes allows design coordination with overall site aesthetics.
Public space installations require compliance with relevant Australian Standards including AS 1379 for concrete specification and supply. Council projects often specify particular aggregate types and exposure depths to match existing streetscape materials—City of Melbourne specifications, for example, require N40 strength grade with 14mm crushed basalt for exposed aggregate kerbs, matching the bluestone character of established streetscapes.
Exposed Aggregate Applications Across Melbourne
Driveways for Modern and Traditional Melbourne Homes
Exposed aggregate is commonly used for driveways where both durability and appearance are important. Its ability to handle vehicle traffic while maintaining a decorative finish makes it a reliable option.
Pathways and Entry Areas for Enhanced Curb Appeal
Pathways create the transition between street and home, establishing visual impressions before visitors reach the front door. Exposed aggregate allows this transition to enhance rather than detract from property presentation, with aggregate selection coordinating with house materials and garden design.
Entry areas benefit from the combination of visual appeal and practical durability—handling foot traffic, delivery activity, and weather exposure while maintaining the appearance that contributes to overall property value.
Pool Surrounds for Safety and Aesthetics
Pool surrounds present specific requirements: slip resistance when wet, comfort underfoot, heat management on sun-exposed surfaces, and resistance to chlorinated water splash. Exposed aggregate addresses each of these considerations when appropriate aggregates are selected.
Lighter coloured aggregates reduce heat absorption, maintaining comfortable surface temperatures during summer. Rounded pebbles provide smoother textures suitable for barefoot use while maintaining adequate slip resistance. The continuous surface eliminates joints where algae might establish or water might pool.
Our Professional Installation Process
Step 1: Site Assessment and Design
Every exposed aggregate project begins with onsite evaluation of existing conditions. This assessment covers soil characteristics—particularly important in Melbourne where reactive clay soils are common and require specific preparation approaches. Drainage requirements, access constraints, existing services, and slope conditions inform both design and construction planning.
Aggregate selection occurs during this consultation phase. We present samples of available aggregate types and blends, discussing how different options suit your property’s architecture, landscaping, and intended use. Colour coordination with house materials, preferred texture levels, and budget considerations guide the final aggregate specification.
Step 2: Preparation and Base Work
Proper preparation determines long-term performance. Excavation removes existing material to required depth, accounting for base layer thickness, concrete slab depth, and finished surface level relative to surrounding elements. In reactive soil areas, additional depth or moisture management measures may be incorporated.
Base preparation involves placing and compacting crushed rock to create a stable foundation. Compaction achieves approximately 95% Modified Proctor density to prevent future settlement. Reinforcement installation—typically steel mesh for residential applications or bar reinforcement for heavy-duty commercial use—provides tensile strength to resist cracking under load and thermal movement.
Formwork establishes edge profiles and levels, with careful attention to drainage falls directing water away from buildings and towards appropriate discharge points. Control joint locations are planned during this phase, positioning cuts to accommodate shrinkage cracking at predetermined locations rather than allowing random crack development.
Step 3: Concrete Pour and Finishing
Concrete placement requires coordination with batch plant delivery schedules and site readiness. The mix specification—strength grade, aggregate size, slump, and any admixtures—follows AS 1379 requirements appropriate to the project. Common specifications include N32 or N40 grades with 20mm maximum aggregate size for residential driveways.
Placement, spreading, and initial levelling occur immediately following delivery. Bull float and finishing tools work the surface to achieve correct levels while consolidating the concrete without segregating the aggregate. The timing of subsequent operations depends on ambient temperature, humidity, and mix characteristics.
Surface retarder application must occur within specific time windows—typically when the concrete has firmed sufficiently to walk on but before the surface cement paste hardens fully. This retarder delays paste set at the surface while allowing the underlying concrete to continue curing, creating the differential hardening that enables controlled aggregate exposure.
Step 4: Cleaning, Sealing and Protection
The washing process removes retarder-affected cement paste to reveal the aggregate beneath. Timing is critical—typically 4 to 24 hours after placement depending on conditions and retarder type. Pressure washing at appropriate settings removes the paste layer without dislodging aggregate or creating uneven exposure.
Once washed and allowed to dry, the surface receives protective sealer application. Quality sealers penetrate the concrete surface and coat the exposed aggregate, protecting against oil stains, water absorption, and UV effects while enhancing the natural stone colours. Full cure of both concrete and sealer typically requires several days before the surface can accept vehicle traffic.
Ongoing protection depends on periodic resealing—typically every two to three years—and prompt attention to any stains or spills that could penetrate the sealer layer.
Get Your Free Exposed Aggregate Quote Today
Service Areas
Nupave provides exposed aggregate installation and restoration services throughout Melbourne metropolitan areas and the broader region:
Melbourne Metropolitan – All suburbs including eastern, western, northern, and southern Melbourne
Mornington Peninsula – From Frankston to Portsea and surrounding areas
Bass Coast and Phillip Island – Coastal properties and township locations
West and South Gippsland – Regional service for residential and commercial projects
Our team provides free onsite quotations including site assessment, aggregate selection consultation, and detailed project pricing. We can present aggregate samples and discuss design options appropriate to your property and requirements.
Phone: Contact our office to schedule your consultation
Service commitment: Professional installation to Australian Standards with quality local aggregates
Exposed aggregate concrete works well for Heatherton driveways, pool surrounds and paths. Where the existing concrete is still sound, spray-on concrete resurfacing in Heatherton can recreate the exposed look without a full rebuild. Surrounding suburbs like Moorabbin often see the same approach, with exposed finishes in strong demand locally. Our full exposed aggregate concrete across Melbourne service extends right across the City of Kingston.