Nupave recommended external concrete specification — Hampton
Group 1 — Bayside / Sand Belt — Brighton Group Sands
Concrete: 32 MPa (all exposed aggregate)
Indicative regional ground conditions
Hampton sits on the Bayside / Sand Belt, where the natural profile is dominated by free-draining Brighton Group sands. Regional ground conditions are generally stable and low-reactivity, though loose sand pockets can require additional compaction. The actual AS 2870 site classification for any individual property can only be established through a site-specific geotechnical investigation, taking into account soil profile, fill, moisture conditions and vegetation.
Regional ground movement (indicative, AS 2870)
Ground of this type may exhibit generally low seasonal surface movement (indicatively under 20 mm). This is a regional indicator only — actual movement at a given address depends on soil profile, moisture history and tree influence.
| Application | Slab thickness | Sub-base | Reinforcement |
|---|---|---|---|
| Path / foot traffic | 75–100 mm | 50–75 mm compacted crushed rock | SL72 |
| Driveway (cars up to 3 t) | 100 mm | 75–100 mm compacted crushed rock | SL72–SL82 |
| Occasional truck (3–10 t) | 125–150 mm | 100 mm compacted crushed rock | SL82 or rebar |
Nupave standard specification for typical conditions of this soil group — subject to site-specific assessment. Not a design substitute for a project engineer’s report where one is required.
| Saw-cut / control joint spacing (100 mm slab) | |
|---|---|
| Spacing between cuts | 2.7 m – 3.0 m (standard spacing) |
| Cut depth & timing | At least 25 mm on a 100 mm slab (¼ slab thickness). Saw-cut as soon as the concrete can be cut without excessive ravelling — timing will vary with the mix, weather and saw type. A quick trial cut on a low-visibility edge or offcut is best practice before committing to the full grid. |
| What joints do | Closer joint spacing and properly proportioned panels encourage drying-shrinkage and thermal movement to occur at planned locations. Control joints reduce the risk of random cracking; they do not prevent cracking caused by inadequate support or differential ground movement. |
| Panel shape | Keep panels close to square (length ≤ 1.5× width). Long, narrow panels are more prone to random cracking regardless of joint spacing. |
Concrete grade
All Nupave exposed aggregate is poured at N32 as standard, regardless of soil group. The aggregate-exposure process removes the top cement paste layer, so the slab benefits from the higher compressive strength, improved durability and better abrasion resistance of N32. For non-exposed external concrete work, Nupave specifies N25 or N32 depending on application, anticipated loading, exposure conditions, selected finish and any site-specific engineering requirements. Concrete strength alone does not compensate for inadequate subgrade preparation, drainage or ground movement — it is one element within a properly detailed slab system.
Slip layer (poly membrane)
A polyethylene separation or slip membrane may be considered where required by the slab design or site conditions. It can reduce friction between the slab and compacted base during concrete shrinkage, but does not prevent settlement, heave or other vertical ground movement. Where a project engineer or geotechnical report specifies membrane use, that specification takes precedence.
Sub-base — why it’s a key part of the quote
Correct excavation, drainage, and a uniformly compacted crushed-rock base significantly reduce settlement and provide consistent support under the slab. It adds cost — both in laying and compacting the base, and in the extra excavation and spoil-removal that comes with the deeper dig — but that preparation is what a slab needs to perform over the long term. The preparation actually required may vary where uncontrolled fill, soft areas or unsuitable material are encountered on the specific site.
Curing coat
Concrete requires curing to develop its full design strength and durability. A liquid curing coat is applied after finishing, once bleed water has disappeared and in accordance with the manufacturer's requirements. It seals moisture into the concrete so hydration continues over the first 7 days — when the concrete's real strength develops. In summer, hot dry weather removes surface moisture quickly, so curing coat is essential to prevent surface crazing and reduced final strength. In winter, lower temperatures slow hydration, so curing is still required to reach design strength — the curing coat is still applied, and duration may need to be extended. Nupave applies curing coat as standard on all pours year-round.
Microfibres in concrete mix Optional add-on
What fibres actually do. Microfibres (polypropylene) get mixed through the whole pour and mainly control plastic shrinkage cracking in the first 24 hours, plus improve abrasion / impact resistance — they don’t add real structural tensile capacity. Macrofibres (heavier synthetic or steel) go further, adding post-crack toughness and some flexural strength.
Genuine benefit as an add-on: reduces fine / hairline shrinkage cracking and improves durability on any slab, sand or clay.
Should NOT replace mesh on soft or highly plastic clay soils: fibres provide no real resistance to the larger, ground-movement-driven cracks that mesh or rebar controls.
Salt / coastal exposure
Suburbs within roughly 1 km of Port Phillip Bay are subject to salt spray. Nupave uses B1 exposure classification (N32 minimum) and increases concrete cover to reinforcement on foreshore-proximate work to protect against saline-induced corrosion.
Important: This is Nupave’s enhanced standard specification for typical conditions in this suburb group, and is presented as a general reference. It is not a site-specific engineering design. Actual specifications for any individual property may vary based on site conditions, uncontrolled fill, tree influence, drainage, or requirements identified in a site-specific geotechnical or engineer’s report. Where an engineered design has been prepared for the site, that design takes precedence.
Exposed Aggregate Concrete for Driveways and Entryways Hampton
Professional Exposed Aggregate Installation and Restoration
You’ll find Hampton about 15 km southeast of Melbourne CBD — a popular beachside suburb with a strong village atmosphere and family-friendly community. The suburb is home to Hampton Beach, Hampton Street shops and cafes, and Thomas Street Reserve. You’ll find Edwardian and interwar period homes alongside modern renovations, many with generous front setbacks throughout the suburb. Whether you’re upgrading an existing driveway or finishing a new build in Hampton, exposed aggregate delivers a durable and visually appealing result. The local lifestyle in Hampton puts real demands on driveways and outdoor areas — surfaces need to perform as well as they look. The Bayside area is well-regarded across Melbourne, and Hampton is no exception.
Exposed aggregate concrete delivers a durable, slip-resistant finish that reveals natural stone textures beneath the cement surface—combining structural performance with decorative appeal for Melbourne properties.
Nupave specialises in exposed aggregate installation and restoration across Melbourne, the Mornington Peninsula, Bass Coast, Phillip Island, and surrounding regions. Our team handles everything from new driveways and pool surrounds to commercial flooring projects, using locally sourced aggregates and installation methods that meet Australian Standards.
Why Exposed Aggregate Concrete is Perfect for Melbourne Properties
Low Maintenance Requirements When Properly Sealed
Exposed aggregate concrete is low maintenance when properly sealed, with resealing typically required every few years to protect against stains, moisture, and wear. General upkeep is simple, usually involving occasional cleaning with water or mild detergent to maintain its appearance. Compared to materials like pavers or timber, it requires significantly less ongoing maintenance while still delivering long-term durability.
At Nupave, our commitment to our customers doesn’t end once the job is complete. We understand that life gets busy, and important maintenance like resealing can easily be overlooked. That’s why we’ve created a simple care plan system, where your project is added to our register and you receive timely reminders when your concrete is due for resealing. There’s no cost for this service — it’s simply part of how we look after our clients and help protect their investment long-term. By staying on top of maintenance, your surface continues to perform and look its best for years to come, without you having to keep track of it yourself.
Durability Compared to Plain Concrete and Other Decorative Options
Exposed aggregate concrete offers structural durability that matches or exceeds plain concrete while providing superior visual longevity. When properly installed with appropriate strength grades—commonly N32 or N40 for driveways and high-traffic areas—exposed aggregate surfaces in Melbourne can last 25 to 35 years or more. Some installations under optimal conditions reach 40 years of service life, particularly when combined with regular sealing and proper drainage management.
The durability advantage over plain concrete becomes apparent in how the surfaces age. Plain concrete tends to show tyre marks, surface staining, and colour fading more prominently over time. The cement paste layer that forms the visible surface of plain concrete is more susceptible to UV degradation and wear. Exposed aggregate, by contrast, places natural stone as the primary wearing surface. Hard aggregates like basalt and granite resist abrasion and weathering far better than cement paste alone, maintaining their appearance even under vehicle traffic and Melbourne’s variable weather conditions.
Compared to other decorative concrete options such as stamped concrete or coloured concrete, exposed aggregate typically requires less cosmetic maintenance. Stamped concrete may need periodic recolouring or pattern repair as the surface wears. Pavers require joint maintenance and can shift over time, allowing weed growth between units. Exposed aggregate presents a monolithic surface without joints, reducing ongoing maintenance demands while providing a naturally durable wearing course.
Visual Appeal and Customisation Options
Exposed aggregate offers strong visual appeal through the natural beauty of stone, rather than relying on artificial colours or patterns. With a wide range of aggregates available—such as basalt, granite, and river pebbles—finishes can be tailored to suit different home styles and outdoor spaces. Variations in stone size and blend allow for further customisation, creating anything from subtle, refined textures to more pronounced, decorative finishes.
Long-Lasting Performance for High-Traffic Areas
Exposed aggregate is designed to handle high-traffic areas, combining structural concrete strength with durable natural stone to withstand daily vehicle use and foot traffic. When installed with the correct strength, reinforcement, and preparation, it delivers long-term performance without significant wear. This makes it a reliable choice for driveways and other areas where durability is essential.
Our Exposed Aggregate Services
Residential Exposed Aggregate
We provide custom exposed aggregate installations for residential properties across Melbourne, with each project tailored to suit the home’s style, usage, and site conditions. Driveways, pathways, patios, and pool surrounds are designed with the right aggregate selection, reinforcement, and drainage to ensure both visual appeal and long-term performance. Where suitable, we also assess existing concrete for resurfacing options, offering a cost-effective alternative to full replacement when the slab is structurally sound.
Commercial Exposed Aggregate Flooring
Commercial projects demand attention to compliance requirements, traffic loads, and design integration with broader site development. Office building entrances and corporate walkways benefit from exposed aggregate’s professional appearance and minimal maintenance requirements, reducing ongoing management costs while enhancing property presentation.
Retail and hospitality applications utilise exposed aggregate for outdoor dining areas, shopping centre walkways, and entrance features. The durability handles high pedestrian volumes while the range of available finishes allows design coordination with overall site aesthetics.
Public space installations require compliance with relevant Australian Standards including AS 1379 for concrete specification and supply. Council projects often specify particular aggregate types and exposure depths to match existing streetscape materials—City of Melbourne specifications, for example, require N40 strength grade with 14mm crushed basalt for exposed aggregate kerbs, matching the bluestone character of established streetscapes.
Is New Concrete Always Necessary?
Before investing in a brand new exposed aggregate driveway, it’s important to understand whether your existing concrete can be improved rather than replaced. Many surfaces that look beyond repair can often be transformed using alternative methods, avoiding the need for costly excavation. A professional inspection can give you a clear answer and help you avoid unnecessary expenses while still achieving a high-end result.
Before committing to new exposed aggregate concrete, it’s worth having your existing surface professionally assessed. In many cases, concrete that appears worn, outdated, or damaged can be restored or resurfaced at a significantly lower cost than full replacement. A proper evaluation can help determine whether excavation is actually necessary, potentially saving thousands while still achieving a high-quality finish. Getting expert advice first ensures you’re making the right decision based on the condition of your current concrete, not just assumptions.
Not every surface needs to be replaced — in many cases, there are more cost-effective options available.
Exposed Aggregate Applications Across Melbourne
Commercial Entrances and High-Traffic Areas
Exposed aggregate is ideal for commercial entrances and high-traffic areas, combining a professional appearance with the durability needed to handle constant foot traffic. It provides a stable, long-lasting surface for plazas, walkways, and entry points while requiring less ongoing maintenance than alternatives like pavers. When specified and installed correctly, it delivers a reliable solution suited to the demands of commercial environments.
Driveways for Modern and Traditional Melbourne Homes
Aggregate concrete driveways remain one of the most popular applications, combining the durability required for daily vehicle use with the visual appeal that enhances property presentation. The range of available aggregate colours and textures means exposed aggregate suits both contemporary architectural styles—using charcoal blends or crushed quartzite accents—and traditional Melbourne homes where warmer earth tones or heritage-matched basalt complement established character.
For new home construction, exposed aggregate driveways offer a premium finish that increases curb appeal and provides long-term performance. The cost premium over plain concrete is typically recovered through extended service life and reduced maintenance requirements over the installation’s 25 to 35 year lifespan.
Outdoor Entertaining Areas and Patios
Exposed aggregate driveways are a popular choice for Melbourne homes, combining the durability needed for daily vehicle use with a finish that enhances overall street appeal. With a wide range of colours and textures available, they suit both modern designs and more traditional properties, allowing the surface to complement the home’s style. For new builds, exposed aggregate offers a premium, long-lasting finish that delivers both visual impact and reliable performance over time.
Pathways and Entry Areas for Enhanced Curb Appeal
Exposed aggregate pathways and entry areas enhance curb appeal by creating a strong visual connection between the street and the home. With a range of finishes available, the surface can be tailored to complement surrounding materials and landscaping. At the same time, it provides a durable, low-maintenance solution that handles daily foot traffic while maintaining its appearance over time.
Our Professional Installation Process
Every exposed aggregate project begins with a detailed site assessment, where we evaluate soil conditions, drainage, access, and overall layout. This allows us to recommend the right preparation method and help you select an aggregate that suits your home, surroundings, and intended use.
Preparation is key to long-term performance. The area is excavated, a compacted crushed rock base is installed, and reinforcement is placed to provide strength and stability. Formwork and drainage are carefully set to ensure the finished surface performs as well as it looks.
Concrete is then poured, levelled, and finished to the required specification, with timing carefully controlled to achieve consistent aggregate exposure. A surface retarder is applied and later washed off to reveal the natural stone, creating the textured finish exposed aggregate is known for.
Once cured, the surface is sealed to protect against staining, moisture, and wear while enhancing the natural colour of the stone. With proper installation and ongoing maintenance, exposed aggregate delivers a durable, long-lasting result suited to Melbourne conditions.
Get Your Free Exposed Aggregate Quote Today
Nupave provides professional exposed aggregate installations across Melbourne and surrounding regions, including metropolitan Melbourne, the Mornington Peninsula, Bass Coast, and West and South Gippsland.
Every project begins with a free onsite consultation, where we assess your site conditions, discuss design options, and help you select the right aggregate to suit your property. You’ll receive clear, detailed pricing along with expert advice to ensure you’re making the right decision from the start.
Our commitment is to deliver high-quality workmanship using premium local materials, installed to Australian Standards for long-term performance.
Contact us today to arrange your consultation.
Hampton’s beachside village feel is let down fast by a cracked or stained driveway, and salt air here is relentless on bare concrete. If the underlying slab is still structurally sound, concrete resurfacing in Hampton can achieve a similar decorative look without the cost of replacement. Nearby areas such as Sandringham share similar conditions, making exposed finishes a popular option across the region. We provide full exposed aggregate concrete across Melbourne services, covering the broader City of Bayside area.