Nupave recommended external concrete specification — Glen Iris
Group 1 — Bayside / Sand Belt — Brighton Group Sands
Concrete: 32 MPa (all exposed aggregate)
Indicative regional ground conditions
Glen Iris sits on the Bayside / Sand Belt, where the natural profile is dominated by free-draining Brighton Group sands. Regional ground conditions are generally stable and low-reactivity, though loose sand pockets can require additional compaction. The actual AS 2870 site classification for any individual property can only be established through a site-specific geotechnical investigation, taking into account soil profile, fill, moisture conditions and vegetation.
Regional ground movement (indicative, AS 2870)
Ground of this type may exhibit generally low seasonal surface movement (indicatively under 20 mm). This is a regional indicator only — actual movement at a given address depends on soil profile, moisture history and tree influence.
| Application | Slab thickness | Sub-base | Reinforcement |
|---|---|---|---|
| Path / foot traffic | 75–100 mm | 50–75 mm compacted crushed rock | SL72 |
| Driveway (cars up to 3 t) | 100 mm | 75–100 mm compacted crushed rock | SL72–SL82 |
| Occasional truck (3–10 t) | 125–150 mm | 100 mm compacted crushed rock | SL82 or rebar |
Nupave standard specification for typical conditions of this soil group — subject to site-specific assessment. Not a design substitute for a project engineer’s report where one is required.
| Saw-cut / control joint spacing (100 mm slab) | |
|---|---|
| Spacing between cuts | 2.7 m – 3.0 m (standard spacing) |
| Cut depth & timing | At least 25 mm on a 100 mm slab (¼ slab thickness). Saw-cut as soon as the concrete can be cut without excessive ravelling — timing will vary with the mix, weather and saw type. A quick trial cut on a low-visibility edge or offcut is best practice before committing to the full grid. |
| What joints do | Closer joint spacing and properly proportioned panels encourage drying-shrinkage and thermal movement to occur at planned locations. Control joints reduce the risk of random cracking; they do not prevent cracking caused by inadequate support or differential ground movement. |
| Panel shape | Keep panels close to square (length ≤ 1.5× width). Long, narrow panels are more prone to random cracking regardless of joint spacing. |
Concrete grade
All Nupave exposed aggregate is poured at N32 as standard, regardless of soil group. The aggregate-exposure process removes the top cement paste layer, so the slab benefits from the higher compressive strength, improved durability and better abrasion resistance of N32. For non-exposed external concrete work, Nupave specifies N25 or N32 depending on application, anticipated loading, exposure conditions, selected finish and any site-specific engineering requirements. Concrete strength alone does not compensate for inadequate subgrade preparation, drainage or ground movement — it is one element within a properly detailed slab system.
Slip layer (poly membrane)
A polyethylene separation or slip membrane may be considered where required by the slab design or site conditions. It can reduce friction between the slab and compacted base during concrete shrinkage, but does not prevent settlement, heave or other vertical ground movement. Where a project engineer or geotechnical report specifies membrane use, that specification takes precedence.
Sub-base — why it’s a key part of the quote
Correct excavation, drainage, and a uniformly compacted crushed-rock base significantly reduce settlement and provide consistent support under the slab. It adds cost — both in laying and compacting the base, and in the extra excavation and spoil-removal that comes with the deeper dig — but that preparation is what a slab needs to perform over the long term. The preparation actually required may vary where uncontrolled fill, soft areas or unsuitable material are encountered on the specific site.
Curing coat
Concrete requires curing to develop its full design strength and durability. A liquid curing coat is applied after finishing, once bleed water has disappeared and in accordance with the manufacturer's requirements. It seals moisture into the concrete so hydration continues over the first 7 days — when the concrete's real strength develops. In summer, hot dry weather removes surface moisture quickly, so curing coat is essential to prevent surface crazing and reduced final strength. In winter, lower temperatures slow hydration, so curing is still required to reach design strength — the curing coat is still applied, and duration may need to be extended. Nupave applies curing coat as standard on all pours year-round.
Microfibres in concrete mix Optional add-on
What fibres actually do. Microfibres (polypropylene) get mixed through the whole pour and mainly control plastic shrinkage cracking in the first 24 hours, plus improve abrasion / impact resistance — they don’t add real structural tensile capacity. Macrofibres (heavier synthetic or steel) go further, adding post-crack toughness and some flexural strength.
Genuine benefit as an add-on: reduces fine / hairline shrinkage cracking and improves durability on any slab, sand or clay.
Should NOT replace mesh on soft or highly plastic clay soils: fibres provide no real resistance to the larger, ground-movement-driven cracks that mesh or rebar controls.
Salt / coastal exposure
Suburbs within roughly 1 km of Port Phillip Bay are subject to salt spray. Nupave uses B1 exposure classification (N32 minimum) and increases concrete cover to reinforcement on foreshore-proximate work to protect against saline-induced corrosion.
Important: This is Nupave’s enhanced standard specification for typical conditions in this suburb group, and is presented as a general reference. It is not a site-specific engineering design. Actual specifications for any individual property may vary based on site conditions, uncontrolled fill, tree influence, drainage, or requirements identified in a site-specific geotechnical or engineer’s report. Where an engineered design has been prepared for the site, that design takes precedence.
Exposed Aggregate Concrete for Driveways and Entryways Glen Iris
Professional Exposed Aggregate Installation and Restoration
As one of Melbourne’s Stonnington suburbs, Glen Iris is a leafy, family-friendly suburb with a mix of period charm and modern amenities, positioned about 10 km southeast of Melbourne CBD. Notable local features include High Street Glen Iris shops, Malvern Valley Golf Club, and Gardiners Creek trail. Exposed aggregate is well-suited to Glen Iris’s mix of property styles, offering a finish that complements both older homes and newer builds.
Exposed aggregate concrete delivers a durable, slip-resistant finish that reveals natural stone textures beneath the cement surface—combining structural performance with decorative appeal for Melbourne properties.
Nupave specialises in exposed aggregate installation and restoration across Melbourne, the Mornington Peninsula, Bass Coast, Phillip Island, and surrounding regions. Our team handles everything from new driveways and pool surrounds to commercial flooring projects, using locally sourced aggregates and installation methods that meet Australian Standards.
Why Exposed Aggregate Concrete is Perfect for Melbourne Properties
Low Maintenance Requirements When Properly Sealed
Exposed aggregate concrete requires relatively low maintenance compared to many alternative exterior materials when the surface is properly sealed after installation. The primary ongoing requirement is periodic resealing—typically every two to three years, though high-traffic areas or surfaces with significant UV exposure may benefit from more frequent attention. This resealing protects against staining, helps resist water penetration, and maintains the visual enhancement that quality sealers provide.
General cleaning involves hosing down the surface and occasional washing with mild detergent to remove accumulated dirt, leaves, and other contaminants. Pressure washing can be used but should be applied at lower pressure settings and appropriate angles to avoid dislodging aggregate or damaging the sealer layer. Oil stains and spills should be cleaned promptly to prevent absorption into the concrete matrix.
Compared to pavers—which require joint sand replenishment, weed control, and periodic realignment—exposed aggregate presents fewer maintenance tasks. The continuous surface eliminates joints where weeds establish and where ants create sand displacement. Compared to timber decking or other materials requiring annual treatments, exposed aggregate offers a more straightforward maintenance schedule focused primarily on cleaning and periodic sealing.
At Nupave, we take a long-term approach to every project, with a focus on protecting the quality and finish well beyond installation. To support this, each completed surface is entered into our client care register, allowing us to monitor and notify you when maintenance such as resealing is due. This complimentary service is part of our standard of care, ensuring your concrete continues to look and perform as intended without relying on you to keep track of timeframes. It’s one of the ways we deliver not just a finished surface, but a lasting result.
What Exposed Aggregate Concrete Is and How It’s Created
Exposed aggregate concrete is a decorative concrete finish created by removing the top layer of cement paste to reveal the natural stone, pebbles, and gravel embedded within the mix. This process produces a textured, visually distinctive surface that differs significantly from plain finished concrete. The aggregate—whether basalt, granite, river pebbles, or crushed quartz—becomes the dominant visual element, creating surfaces that range from subtle stone exposure to pronounced decorative textures depending on the desired appearance.
Unlike standard concrete where the aggregate remains hidden beneath a smooth cement surface, exposed aggregate incorporates natural stones as a visible design feature. The variation in stone size, shape, and colour allows for a customised appearance, with each installation carrying a unique character determined by the specific aggregate blend selected. This method has been used in Melbourne for decades, with local suppliers offering aggregate options sourced from Victorian quarries—primarily basalt from the Newer and Older Volcanics geological formations, along with granite and sedimentary rock materials.
The finish is achieved through a controlled washing process where the surface layer of concrete is exposed at a precise timing window. Surface retarders are applied to delay cement paste hardening on the top layer, allowing contractors to wash away the cement and reveal the underlying aggregate without dislodging the stones. This technique requires careful control—exposure too early risks aggregate loss, while waiting too long makes the cement paste difficult to remove. The result is a surface where approximately one-third of the smallest aggregate size becomes visible, creating the characteristic textured appearance.
Visual Appeal and Customisation Options
Exposed aggregate offers strong visual appeal through the natural beauty of stone, rather than relying on artificial colours or patterns. With a wide range of aggregates available—such as basalt, granite, and river pebbles—finishes can be tailored to suit different home styles and outdoor spaces. Variations in stone size and blend allow for further customisation, creating anything from subtle, refined textures to more pronounced, decorative finishes.
Our Exposed Aggregate Services
Residential Exposed Aggregate
We create custom exposed aggregate installations for residential properties throughout Melbourne and surrounding areas. New driveways benefit from aggregate selection tailored to complement house colours and landscaping, with slab thickness and reinforcement designed for household vehicle loads and local soil conditions.
Pathways, patios, and outdoor entertaining areas receive the same attention to design and construction detail. Pool surrounds utilise aggregate types selected for barefoot comfort and slip resistance, with drainage slopes directing water away from the pool edge and house foundations.
Exposed aggregate resurfacing provides an option for existing concrete surfaces in sound structural condition. This overlay approach can transform plain or deteriorating concrete into attractive exposed aggregate finishes without the full excavation and base preparation required for new installations. Our consultation process assesses whether resurfacing is appropriate for each specific situation based on existing concrete condition and intended use.
Is New Concrete Always Necessary?
If you’re considering new exposed aggregate concrete, it’s worth checking whether your current surface actually needs to be removed. In some cases, existing concrete can be upgraded or refinished, providing a similar visual outcome without the cost and disruption of a full replacement. Having the area assessed first can help you make an informed decision and potentially save a significant amount of money.
Many homeowners assume that worn or dated concrete needs to be completely replaced, but that isn’t always the case. Before committing to new exposed aggregate, a proper assessment can determine whether the existing slab is suitable for improvement rather than removal. This approach can reduce costs, minimise disruption, and still deliver a high-quality finish.
Our approach is to recommend the best option, not the most expensive one
Concrete Services in Glen Iris
Frequently Asked Questions
Can exposed aggregate be installed over existing concrete?
Exposed aggregate overlays can be applied over existing concrete surfaces that are structurally sound—no significant cracking, no active settlement, and adequate adhesion between old and new surfaces. This resurfacing approach provides a cost-effective alternative to complete removal and replacement where the existing base is serviceable.
Assessment of existing concrete condition is essential before recommending overlay installation. Surfaces with structural cracks, active movement, or delamination require repair or replacement rather than overlay. Where overlay is appropriate, specialised bonding techniques and overlay mixes ensure the new exposed aggregate surface adheres properly and performs as expected.
Is exposed aggregate suitable for driveways?
Yes, exposed aggregate is widely used for driveways due to its strength and ability to handle vehicle traffic. Its textured surface also provides additional grip compared to plain concrete.
What is exposed aggregate concrete?
Exposed aggregate concrete is a decorative finish where the top layer of cement is removed to reveal the natural stones within the mix. This creates a textured, durable surface commonly used for driveways, pathways, and outdoor areas.
Get Your Free Exposed Aggregate Quote Today
Service Areas
Nupave provides exposed aggregate installation and restoration services throughout Melbourne metropolitan areas and the broader region:
Melbourne Metropolitan – All suburbs including eastern, western, northern, and southern Melbourne
Mornington Peninsula – From Frankston to Portsea and surrounding areas
Bass Coast and Phillip Island – Coastal properties and township locations
West and South Gippsland – Regional service for residential and commercial projects
Our team provides free onsite quotations including site assessment, aggregate selection consultation, and detailed project pricing. We can present aggregate samples and discuss design options appropriate to your property and requirements.
Phone: Contact our office to schedule your consultation
Service commitment: Professional installation to Australian Standards with quality local aggregates
Glen Iris has a mix of Californian bungalows and modern rebuilds, and the older driveways often get overlooked in renos until they start lifting. Where the existing concrete is still sound, concrete resurfacing in Glen Iris can recreate the exposed look without a full rebuild. Surrounding suburbs like Malvern East often see the same approach, with exposed finishes in strong demand locally. Our full exposed aggregate concrete Melbourne services service extends right across the City of Stonnington.