Nupave recommended external concrete specification — Bentleigh
Group 1 — Bayside / Sand Belt — Brighton Group Sands
Concrete: 32 MPa (all exposed aggregate)
Indicative regional ground conditions
Bentleigh sits on the Bayside / Sand Belt, where the natural profile is dominated by free-draining Brighton Group sands. Regional ground conditions are generally stable and low-reactivity, though loose sand pockets can require additional compaction. The actual AS 2870 site classification for any individual property can only be established through a site-specific geotechnical investigation, taking into account soil profile, fill, moisture conditions and vegetation.
Regional ground movement (indicative, AS 2870)
Ground of this type may exhibit generally low seasonal surface movement (indicatively under 20 mm). This is a regional indicator only — actual movement at a given address depends on soil profile, moisture history and tree influence.
| Application | Slab thickness | Sub-base | Reinforcement |
|---|---|---|---|
| Path / foot traffic | 75–100 mm | 50–75 mm compacted crushed rock | SL72 |
| Driveway (cars up to 3 t) | 100 mm | 75–100 mm compacted crushed rock | SL72–SL82 |
| Occasional truck (3–10 t) | 125–150 mm | 100 mm compacted crushed rock | SL82 or rebar |
Nupave standard specification for typical conditions of this soil group — subject to site-specific assessment. Not a design substitute for a project engineer’s report where one is required.
| Saw-cut / control joint spacing (100 mm slab) | |
|---|---|
| Spacing between cuts | 2.7 m – 3.0 m (standard spacing) |
| Cut depth & timing | At least 25 mm on a 100 mm slab (¼ slab thickness). Saw-cut as soon as the concrete can be cut without excessive ravelling — timing will vary with the mix, weather and saw type. A quick trial cut on a low-visibility edge or offcut is best practice before committing to the full grid. |
| What joints do | Closer joint spacing and properly proportioned panels encourage drying-shrinkage and thermal movement to occur at planned locations. Control joints reduce the risk of random cracking; they do not prevent cracking caused by inadequate support or differential ground movement. |
| Panel shape | Keep panels close to square (length ≤ 1.5× width). Long, narrow panels are more prone to random cracking regardless of joint spacing. |
Concrete grade
All Nupave exposed aggregate is poured at N32 as standard, regardless of soil group. The aggregate-exposure process removes the top cement paste layer, so the slab benefits from the higher compressive strength, improved durability and better abrasion resistance of N32. For non-exposed external concrete work, Nupave specifies N25 or N32 depending on application, anticipated loading, exposure conditions, selected finish and any site-specific engineering requirements. Concrete strength alone does not compensate for inadequate subgrade preparation, drainage or ground movement — it is one element within a properly detailed slab system.
Slip layer (poly membrane)
A polyethylene separation or slip membrane may be considered where required by the slab design or site conditions. It can reduce friction between the slab and compacted base during concrete shrinkage, but does not prevent settlement, heave or other vertical ground movement. Where a project engineer or geotechnical report specifies membrane use, that specification takes precedence.
Sub-base — why it’s a key part of the quote
Correct excavation, drainage, and a uniformly compacted crushed-rock base significantly reduce settlement and provide consistent support under the slab. It adds cost — both in laying and compacting the base, and in the extra excavation and spoil-removal that comes with the deeper dig — but that preparation is what a slab needs to perform over the long term. The preparation actually required may vary where uncontrolled fill, soft areas or unsuitable material are encountered on the specific site.
Curing coat
Concrete requires curing to develop its full design strength and durability. A liquid curing coat is applied after finishing, once bleed water has disappeared and in accordance with the manufacturer's requirements. It seals moisture into the concrete so hydration continues over the first 7 days — when the concrete's real strength develops. In summer, hot dry weather removes surface moisture quickly, so curing coat is essential to prevent surface crazing and reduced final strength. In winter, lower temperatures slow hydration, so curing is still required to reach design strength — the curing coat is still applied, and duration may need to be extended. Nupave applies curing coat as standard on all pours year-round.
Microfibres in concrete mix Optional add-on
What fibres actually do. Microfibres (polypropylene) get mixed through the whole pour and mainly control plastic shrinkage cracking in the first 24 hours, plus improve abrasion / impact resistance — they don’t add real structural tensile capacity. Macrofibres (heavier synthetic or steel) go further, adding post-crack toughness and some flexural strength.
Genuine benefit as an add-on: reduces fine / hairline shrinkage cracking and improves durability on any slab, sand or clay.
Should NOT replace mesh on soft or highly plastic clay soils: fibres provide no real resistance to the larger, ground-movement-driven cracks that mesh or rebar controls.
Salt / coastal exposure
Suburbs within roughly 1 km of Port Phillip Bay are subject to salt spray. Nupave uses B1 exposure classification (N32 minimum) and increases concrete cover to reinforcement on foreshore-proximate work to protect against saline-induced corrosion.
Important: This is Nupave’s enhanced standard specification for typical conditions in this suburb group, and is presented as a general reference. It is not a site-specific engineering design. Actual specifications for any individual property may vary based on site conditions, uncontrolled fill, tree influence, drainage, or requirements identified in a site-specific geotechnical or engineer’s report. Where an engineered design has been prepared for the site, that design takes precedence.
Your Local Bentleigh Exposed Aggregate Team
If you’re laying a new Bentleigh driveway, path or pool surround, exposed aggregate gives you a decorative stone finish that stands up to traffic, weather and the years. No jargon, no pressure — just a properly engineered slab, a decorative exposed-aggregate finish and a sealer to suit your Bentleigh home. Because exposed aggregate is a proper slab with a decorative finish, here’s what we assess locally before we pour.
Where we pour decorative driveways in Bentleigh
As an established inner-southern suburb ~14km south of Melbourne CBD in the City of Glen Eira, Bentleigh is an area we cover regularly. Our crews are often laying exposed aggregate in Bentleigh, near Bentleigh Secondary College (heritage campus), Centre Road Bentleigh shopping strip and Bentleigh railway station.
Exposed Aggregate Concrete for Driveways and Entryways Bentleigh
Professional Exposed Aggregate Installation and Restoration
You’ll find Bentleigh roughly 14 km southeast of Melbourne CBD — a family-oriented suburb with a thriving cafe culture and excellent schools. The residential landscape here includes a mix of California bungalows, post-war brick veneers, and modern dual-occupancy developments. Exposed aggregate is well-suited to Bentleigh’s mix of property styles, offering a finish that complements both older homes and newer builds. As part of the Glen Eira region, Bentleigh benefits from strong local amenities and established infrastructure. Notable local features include Centre Road dining and shopping precinct, Bentleigh Railway Station, and Victory Park. Outdoor living is a big part of life in Bentleigh, making durable surface finishes a practical investment.
Exposed aggregate concrete delivers a durable, slip-resistant finish that reveals natural stone textures beneath the cement surface—combining structural performance with decorative appeal for Melbourne properties.
Nupave specialises in exposed aggregate installation and restoration across Melbourne, the Mornington Peninsula, Bass Coast, Phillip Island, and surrounding regions. Our team handles everything from new driveways and pool surrounds to commercial flooring projects, using locally sourced aggregates and installation methods that meet Australian Standards.
Why Exposed Aggregate Concrete is Perfect for Melbourne Properties
Low Maintenance Requirements When Properly Sealed
Exposed aggregate concrete is low maintenance when properly sealed, with resealing typically required every few years to protect against stains, moisture, and wear. General upkeep is simple, usually involving occasional cleaning with water or mild detergent to maintain its appearance. Compared to materials like pavers or timber, it requires significantly less ongoing maintenance while still delivering long-term durability.
Slip-Resistant Texture Ideal for Melbourne’s Variable Weather
The textured surface created by exposed aggregate provides natural slip resistance—a critical consideration for Melbourne’s climate where rain occurs throughout the year and morning moisture is common. The stones projecting slightly above the cement matrix create micro-texture that improves traction underfoot and under tyres, making exposed aggregate a slip resistant finish ideal for outdoor applications including driveways, pathways, and pool surrounds.
This slip-resistant characteristic makes exposed aggregate particularly suitable for pool surrounds where wet feet and water splash create ongoing moisture exposure. The natural grip provided by the stone texture reduces slip hazards compared to smooth finished concrete or polished surfaces. For driveways on sloped blocks—common across Melbourne’s hilly eastern suburbs and bayside areas—the improved traction helps prevent vehicle wheel spin during wet weather.
The slip resistance performance does depend on aggregate selection and exposure depth. Rounded river pebbles provide a smoother underfoot feel suitable for barefoot areas, while angular crushed rock creates more pronounced texture with higher grip characteristics. Over-smoothing during finishing or excessive polishing can reduce the slip-resistant properties, so professional installation ensures the appropriate balance between safety and comfort for each application.
Visual Appeal and Customisation Options
Exposed aggregate offers strong visual appeal through the natural beauty of stone, rather than relying on artificial colours or patterns. With a wide range of aggregates available—such as basalt, granite, and river pebbles—finishes can be tailored to suit different home styles and outdoor spaces. Variations in stone size and blend allow for further customisation, creating anything from subtle, refined textures to more pronounced, decorative finishes.
Our Exposed Aggregate Services
Residential Exposed Aggregate
We create custom exposed aggregate installations for residential properties throughout Melbourne and surrounding areas. New driveways benefit from aggregate selection tailored to complement house colours and landscaping, with slab thickness and reinforcement designed for household vehicle loads and local soil conditions.
Pathways, patios, and outdoor entertaining areas receive the same attention to design and construction detail. Pool surrounds utilise aggregate types selected for barefoot comfort and slip resistance, with drainage slopes directing water away from the pool edge and house foundations.
Exposed aggregate resurfacing provides an option for existing concrete surfaces in sound structural condition. This overlay approach can transform plain or deteriorating concrete into attractive exposed aggregate finishes without the full excavation and base preparation required for new installations. Our consultation process assesses whether resurfacing is appropriate for each specific situation based on existing concrete condition and intended use.
Is New Concrete Always Necessary?
If you’re considering new exposed aggregate concrete, it’s worth checking whether your current surface actually needs to be removed. In some cases, existing concrete can be upgraded or refinished, providing a similar visual outcome without the cost and disruption of a full replacement. Having the area assessed first can help you make an informed decision and potentially save a significant amount of money.
If your concrete can be repaired or resurfaced, we’ll tell you — there’s no benefit to you replacing it unnecessarily.
Concrete Services in Bentleigh
Frequently Asked Questions
How long does exposed aggregate concrete last?
When installed correctly and properly maintained, exposed aggregate concrete can last for many years. Its durability makes it suitable for high-traffic areas such as driveways and outdoor spaces.
Can exposed aggregate be installed over existing concrete?
Exposed aggregate overlays can be applied over existing concrete surfaces that are structurally sound—no significant cracking, no active settlement, and adequate adhesion between old and new surfaces. This resurfacing approach provides a cost-effective alternative to complete removal and replacement where the existing base is serviceable.
Assessment of existing concrete condition is essential before recommending overlay installation. Surfaces with structural cracks, active movement, or delamination require repair or replacement rather than overlay. Where overlay is appropriate, specialised bonding techniques and overlay mixes ensure the new exposed aggregate surface adheres properly and performs as expected.
Is exposed aggregate suitable for driveways?
Yes, exposed aggregate is widely used for driveways due to its strength and ability to handle vehicle traffic. Its textured surface also provides additional grip compared to plain concrete.
What is exposed aggregate concrete?
Exposed aggregate concrete is a decorative finish where the top layer of cement is removed to reveal the natural stones within the mix. This creates a textured, durable surface commonly used for driveways, pathways, and outdoor areas.
Get Your Free Exposed Aggregate Quote Today
Nupave provides professional exposed aggregate installations across Melbourne and surrounding regions, including metropolitan Melbourne, the Mornington Peninsula, Bass Coast, and West and South Gippsland.
Every project begins with a free onsite consultation, where we assess your site conditions, discuss design options, and help you select the right aggregate to suit your property. You’ll receive clear, detailed pricing along with expert advice to ensure you’re making the right decision from the start.
Our commitment is to deliver high-quality workmanship using premium local materials, installed to Australian Standards for long-term performance.
Contact us today to arrange your consultation.
Bentleigh’s gone through a serious gentrification phase, with older weatherboards replaced by modern builds — but tired driveways often get left behind. Where the existing concrete is still sound, concrete resurfacing in Bentleigh can recreate the exposed look without a full rebuild. Surrounding suburbs like Bentleigh East often see the same approach, with exposed finishes in strong demand locally. Our full exposed aggregate concrete Melbourne service extends right across the City of Glen Eira.